If you cut cured concrete for a living, the MK-7502 12-inch Pro blade is built for the way flat saws actually get used: long, repeated cuts through slab, pavement and structural concrete with medium-hard aggregate. It is a laser-welded diamond blade with a 12 mm segment height, so there is real diamond depth to work through before the blade is spent. MK Diamond engineers the Pro Series for high horsepower flat saws, which makes this a working contractor blade rather than a light-duty homeowner option.
Use Cases
- Slab and joint cutting. Control joints, saw cuts and trenching in cured concrete with medium-hard aggregate.
- Demolition and removal. Cutting concrete into sections for removal on flat-saw demolition work.
- Utility and repair work. Opening up cured concrete for patching, conduit and plumbing repairs.
Specifications
- Model: MK-7502 Pro Series
- Part number: 152240
- Diameter: 12 in
- Width: .125 in
- Arbor: 1 in
- Segment height: 12 mm
- Construction: Laser welded
Fits
MK-7502 blades are made for high horsepower flat saws cutting cured concrete with medium-hard aggregate. Wide notch core variants and brazed segments (on blades over 24 in) are used on the larger sizes in this family.
Frequently asked questions
What material is the MK-7502 made to cut?
The MK-7502 is made for cured concrete with medium-hard aggregate. For hard aggregate with non-abrasive sand, MK Diamond points to its MK-7501.
What saw does this blade fit?
This 12 in blade has a 1 in arbor and is designed for high horsepower flat saws. Check your saw arbor size and maximum blade diameter before ordering.
How tall is the diamond segment?
The segment height is 12 mm, and the blade is laser welded.
Discount Cleaning Products is an authorized dealer for MK Diamond, with US-based customer service to help match the right blade to your saw, material and job.
