The MK Diamond MK-7601W is a Pro Series blade for cutting green concrete with hard aggregate, and this listing (part number 153187) is the 12-inch size. It is designed and engineered for high horsepower flat saws, with laser-welded segments and a 10mm segment height. Crews that saw control joints into freshly placed slabs need a blade whose bond is matched to the material, and that is the job this model is built for.
Built for
- Sawing control joints in freshly placed concrete slabs on a flat saw
- Cutting green concrete that contains hard aggregate
- Flatwork and paving contractors who run high horsepower flat saws
- Crews that want a blade matched to material instead of a one-size blade
Target buyer: Concrete cutting contractors, flatwork crews and paving companies that run high horsepower flat saws.
About MK-Pro series concrete blades
The MK-Pro Series is designed and engineered for use on high horsepower flat saws. Segments are laser welded to the steel core for strength under heavy feed pressure, and each model is tuned to a different material so the bond wears at the right rate for the aggregate you are cutting.
Choosing the right blade for the material matters more than almost anything else on a flat saw. A bond that is too hard for the material glazes and cuts slowly, and one that is too soft wears away fast. Match the model to your slab, use only the water and feed rate your saw manufacturer recommends, check the arbor and maximum RPM, and wear eye, hearing and respiratory protection.
Why it works on the job
Matched to green concrete. The bond is engineered for green concrete with hard aggregate, so it cuts at a steady rate instead of glazing or wearing away early.
Pro Series construction. Laser-welded segments with a 10mm segment height are built for the feed pressure of a high horsepower flat saw.
Clear sizing. The MK-7601W is offered in 12, 14, 16 and 18-inch diameters with a 1-inch arbor.
Specifications
- Manufacturer: MK Diamond Products
- Model: MK-7601W
- Part number: 153187
- Blade diameter: 12 in
- Grade: Pro Series
- Segment height: 10 mm
- Construction: laser welded
- Arbor: 1 in
- Use: green concrete with hard aggregate on high horsepower flat saws
- Sizes in this line: 12, 14, 16 and 18 in (widths .125 to .250 in)
- Undercut protection: trapezoid on 14 to 18-inch sizes
Frequently asked questions
What is the MK-7601W made to cut?
MK Diamond designs it for green concrete with hard aggregate.
What saws is it for?
It is designed and engineered for high horsepower flat saws.
What size is part number 153187?
This listing is the 12-inch blade. The MK-7601W line includes 12, 14, 16 and 18-inch sizes, all with a 1-inch arbor.
Does the 12-inch blade have undercut protection?
MK Diamond lists trapezoid undercut protection on the 14 to 18-inch sizes of this model.
Discount Cleaning Products is an authorized MK Diamond dealer with US-based customer service. If you are not sure which blade fits your saw, contact our team with the saw make and model and the material you cut, and we will help you match the right diameter, arbor and grade.
