The MK Diamond MK-62G is a Premium Grade segmented rim blade made for cutting granite wet. This 14-inch size, MK part number 153399, is for stone fabricators and installers who cut countertops, slabs and monument stone and want a blade that stays aggressive in dense material.
Use cases
- Granite fabrication. Rough cutting and sizing granite slabs and countertop blanks.
- Stone installation. On-site cuts in granite and similar dense natural stone.
- Monument and landscape stone. Cutting thick stone where a segmented rim clears slurry well.
Specifications
- Model: MK-62G
- Grade: Premium
- Diameter: 14 inches (356 mm)
- Width: .250 inch
- Arbor: 1 inch
- Segment height: 8 mm
- Cutting method: Wet
- MK Diamond part number: 153399
Fit and compatibility
The 153399 fits wet saws that take a 14-inch blade on a 1-inch arbor. MK notes that stock arbors can be bushed to smaller sizes and special arbors are available on request. Run it with a steady water supply and confirm your saw's rpm rating.
Getting the most from the blade
Match the blade diameter and arbor to your saw, keep the blade guard in place, and let the blade do the cutting rather than forcing it through the material. Steady feed pressure keeps the cut straight and helps the segments wear evenly. Keep a steady water supply on the blade so slurry flushes out and the segments stay cool. Wear eye, hearing and respiratory protection and follow the saw maker and MK Diamond safety guidance.
Frequently asked questions
What does the MK-62G cut?
MK Diamond makes the MK-62G for granite.
Is the MK-62G a wet blade?
Yes. It is a segmented rim blade intended for wet cutting.
What are the specs of part 153399?
Part 153399 is 14 inches in diameter, .250 inch wide, with a 1-inch arbor and 8 mm segments.
Can I bush the arbor smaller?
MK states that stock arbors can be bushed to smaller sizes; specify at the time of order.
Discount Cleaning Products is an authorized MK Diamond dealer. Our US-based team can help you match the right blade to your saw before you order.
