The MK Diamond MK-304CR 4-inch blade (part 156090) is a premium grade, thin-rim blade for dry cutting hard and vitreous ceramic tile. MK Diamond designed the MK-304CR to ensure chip-free cutting of tile and other hard materials with minimal heat build-up, which matters when the face of the tile is the finished surface.
This 4-inch (102 mm) size has a .060-inch rim width, a 7mm rim height and a 20mm-5/8-inch arbor, so it suits tile setters who want a small blade for notches, trims and detail cuts.
Use cases
- Porcelain and vitreous tile. Make clean dry cuts in hard tile where chipped edges would show.
- Tile installation. Handle trims, notches and small cuts on the job without a water feed.
- Remodeling and repair. Cut replacement tile to fit around fixtures and edges.
- Hard materials. Use the thin rim on other hard materials MK Diamond lists for this blade.
Specifications
- Brand: MK Diamond
- Model: MK-304CR Premium Thin-Rim Blade for Hard Materials
- Part number: 156090
- Diameter: 4 inches (102 mm)
- Rim width: .060 inch
- Arbor: 20mm-5/8-inch
- Rim height: 7mm
- Cutting method: Dry
Fit and compatibility
Choose by arbor: part 156090 has a 20mm-5/8-inch arbor and part 156090Y has a 7/8-inch-5/8-inch arbor. Confirm that your tool takes a 4-inch blade and matches the arbor before ordering, and check the tool maker's maximum blade speed.
Getting the most from the blade
Let the thin rim do the cutting instead of forcing it, keep the guard in place, and support the tile so it does not flex at the cut. Wear eye, hearing and respiratory protection, since dry cutting tile creates fine dust.
Frequently asked questions
What is the MK-304CR blade used for?
MK Diamond lists the MK-304CR as a thin-rim blade for dry cutting hard and vitreous ceramic tile and other hard materials, designed for chip-free cuts with minimal heat build-up.
What is the difference between 156090 and 156090Y?
They are the same 4-inch blade with different arbors. 156090 has a 20mm-5/8-inch arbor and 156090Y has a 7/8-inch-5/8-inch arbor.
Is it a wet or dry blade?
It is a dry cutting blade.
How tall is the rim?
The rim height is 7mm, with a .060-inch width.
Discount Cleaning Products is an authorized MK Diamond dealer, and our US-based team can help you match the right size, arbor and tool before you order.
