Hydro-Force Viper Prestige Impregnating Sealer- Water Based (1 Gallon x 4)
Hydro-Force Viper Prestige Impregnating Sealer- Water Based (1 Gallon x 4)
 
📊 AI-POWERED MARKET ANALYSIS
• Highlight: Hydro-Force Viper Prestige is a water-based impregnating sealer that uses fluoro-chemical technology to repel water and oil while preserving the natural look of stone.
• Best For: Sealing marble, granite, limestone, travertine, grout, and other porous stone in residential and commercial settings.
• Expert Note: Because Viper Prestige penetrates rather than coating the surface, it guards against spills without altering slip resistance, covering roughly 300-1200 sq ft per gallon by porosity.
Sale Price: $330.00
Estimated Shipping Cost: $31.25


Product Code: 174827
Quantity:

Description Reviews FAQ
 

Hydro-Force Viper Prestige is a ready-to-use, water-based fluorochemical impregnating sealer for natural stone and other hard surfaces. It penetrates rather than coating: the sealer slows the absorption of liquids, particularly oils, while leaving the surface vapor permeable so moisture in the substrate can still evaporate. That matters on stone, where a film-forming sealer can trap moisture and cloud. This item is supplied as a case of four one-gallon containers.

Specifications

  • Pack: 4 x 1 gallon
  • Chemistry: water-based fluorochemical impregnating sealer
  • Dilution: ready to use, do not dilute
  • Coverage: 300 to 1,200 sq ft per gallon depending on surface porosity
  • Dwell time: 15 to 30 minutes, redistributing during that period, then wipe off excess with clean dry towels
  • Second coat: may be applied after 1 hour if needed
  • Cure: walkable in 3 to 4 hours, ready for use in 8 to 12 hours, fully cured in 24 hours
  • Reapplication: every 6 to 18 months depending on traffic, maintenance and surface type
  • pH (ready to use): 10
  • Appearance: yellowish liquid, no odor
  • Manufacturer item numbers: CH08GL, 1687-7247

Surfaces and application

Listed for marble, granite, limestone and travertine, and directions also address grout lines. The manufacturer states it preserves the natural look of stone and protects without affecting slip resistance. Apply by spray at 35 to 50 psi with a 2004 TeeJet nozzle and spread with a synthetic fiber brush, or apply an even coat with a paint pad, roller or brush. Surface temperature should be 50 to 80 F. Intended for interior surfaces. Shake before use and test in an inconspicuous area first, particularly on polished marble and on very porous surfaces.

Hydro-Force is part of the Aramsco family of companies. Discount Cleaning Products carries Hydro-Force and Viper chemicals for professional stone, tile and carpet care.