The EDCO TG-10 MAGNA-TRAP is a 10-inch electric concrete grinder built for the surface-prep and polishing work that drives commercial floor projects. The 5 HP / 230V configuration (part 56900) is the production-spec version - enough torque to push diamond plates through coatings, glue, and thinset without stalling, while staying compact enough to maneuver in finished spaces and through doorways.
Best for
- Concrete surface prep: removing paint, epoxy, urethane, glue, mastic, thinset, and tile residue before new coatings go down.
- Polished concrete in retail, warehouse, and commercial spaces.
- Floor coating remediation on failed epoxy and urethane systems.
- Slab flattening on high spots that defeat self-leveling underlayments.
- Indoor work where gas-powered grinders cannot run.
Why operators choose the TG-10
Floor prep crews comparing grinder platforms on the contractor forums and trade boards land on the same point repeatedly: the 10-inch single-head MAGNA-TRAP is the right size for the kind of room-by-room and area-by-area prep that fills most commercial schedules. Bigger ride-on or planetary grinders are faster on open warehouse slabs, but the TG-10 is what crews reach for when the job has corners, fixtures, or multiple smaller rooms.
Specifications
- Model: EDCO TG-10 MAGNA-TRAP (part 56900)
- Grinding width: 10 inches
- Motor: 5 HP electric
- Voltage: 230V
- Platform: MAGNA-TRAP - accepts EDCO diamond and PCD plates
- Pairs with HEPA dust collection for OSHA-compliant dry grinding
- Brand: EDCO Equipment
Frequently asked questions
What is the EDCO TG-10 MAGNA-TRAP used for?
It is a 10-inch electric concrete grinder for surface prep and floor polishing on commercial and industrial slabs - paint, epoxy, glue, mastic, thinset, and tile residue removal, plus high-spot flattening and polished concrete work.
Is it electric or gas?
Electric. The 56900 is the 5 HP, 230V configuration. Electric is the indoor-friendly choice and 230V gives enough power for production prep work.
What attachments does it use?
The MAGNA-TRAP platform accepts EDCO diamond plates and PCD plates for coating, glue, and thinset removal, plus polishing tools for polished concrete.
Does it pair with a dust vacuum?
Yes - and OSHA silica rules require HEPA dust extraction for dry grinding. EDCO and other manufacturers offer compatible dust collectors and we can package the grinder with one.
Is 5 HP enough?
5 HP at 230V is the production standard for a 10-inch electric grinder. For larger open slabs, contractors step up to 16- or 20-inch propane or three-phase machines.
Discount Cleaning Products is an authorized EDCO Equipment dealer with US-based customer service. Call or email if you want help packaging the TG-10 with the right diamond plates and a HEPA dust collector for your job mix.
