The Tucker High Modulus 50ft Water Fed Pole (Tucker-50HM-Complete) is the top-tier carbon fiber pole in the Tucker lineup, engineered for professional window and solar cleaners who want maximum reach with minimum fatigue. Built from high-modulus carbon fiber, it reaches about 46 ft on its own to clean commercial glass up to four stories, and with extension sections it can reach 70, even 80-plus feet. Its serious rigidity lets you dig in and scrub while saving your muscles and joints.
Built For
- Commercial window cleaning on storefronts and mid-rise buildings up to four stories without ladders.
- Solar panel cleaning where a pure-water-fed brush rinses glass spot-free.
- High-reach work using add-on extension sections to clean 70-80+ feet from the ground.
- All-day production where the lightweight, rigid pole reduces operator fatigue versus heavier poles.
What Is Included
- Tucker HM-50 carbon fiber water fed pole
- Tucker GLIDE brush with 4 pencil jets
- 100 ft of Tucker 5/16-inch OD pole tubing
- One set of male and female quick-connect fittings
- Reach-around gooseneck (attach a coarse scrubbing pad behind the GLIDE brush)
- Red acme tip to convert from water-fed to traditional pole use
Specifications
- High-modulus carbon fiber construction
- Approximately 46 ft reach unextended (cleans up to 4 stories); 70-80+ ft with extensions
- Tucker hand-tightened clamping system - no glue needed, adjust on the fly
- Pole sections and clamps warranted free from manufacturer defects for life
Frequently Asked Questions
How high can the Tucker 50HM reach?
On its own the high-modulus pole reaches about 46 ft to clean commercial windows up to four stories. Add extension sections and you can reach 70, even 80-plus feet from the ground.
What makes high modulus carbon fiber better?
High-modulus carbon fiber is among the lightest and most rigid pole materials available. The added stiffness lets you scrub firmly at full extension while reducing strain on your arms, back, and joints.
What does the reach-around gooseneck do?
The gooseneck lets you mount a coarse scrubbing pad behind the main GLIDE brush. Flip the pole over to use the pad on extra grime, then flip back to rinse with the brush.
Does the pole need glue to stay clamped?
No. Tucker uses a hand-tightened clamping system that holds tightly with no glue, and the clamps can be tightened or loosened on the fly to adjust length as you work.
Is the pole covered by warranty?
Yes. Tucker pole sections and clamps are warranted to be free from manufacturer defects for life, reflecting the durability of the high-modulus carbon fiber build.
Discount Cleaning Products is an authorized Tucker dealer with US-based customer service to help you add extensions, brushes, and tubing to your 50HM pole.
