The Sandia 10-0906 is the housing box that encloses the tubular heater inside a heated Sandia extractor. It is not the part that makes heat -- it is the part that keeps the heat, the wiring and the operator safely separated, and it is what you replace when a box is cracked, corroded, deformed by a thermal event, or lost during a previous repair. Techs listing parts for the Sandia 86-4000-H automotive extractor and related heated models will find this box on the machine parts breakdown.
Built for
- Service techs rebuilding the heater section of a heated Sandia extractor.
- Auto detail and carpet cleaning shops repairing a unit after a heater failure.
- Equipment dealers stocking Sandia heat-assembly components.
- Owners restoring a used machine that arrived with parts missing.
What it does
A tubular heater runs hot and carries line voltage. The box contains it, holds it in position against vibration as the machine is rolled in and out of vans and up stairs, and shields the surrounding plastics and wiring loom from radiant heat. A damaged or absent box is not a cosmetic problem: it lets the element shift, puts heat where the machine was not designed to take it, and exposes live connections. If the box on your machine is cracked or missing, replace it rather than running the machine open.
Sandia builds several heater configurations across the Sniper, Optimizer, Spot-Xtract and Indy lines, and they are not interchangeable. Match the part number on this page to the parts list in your machine's manual, or check the number stamped on the part you are pulling out, before you order.
Specifications
- Manufacturer: Sandia Products
- Part number: 10-0906
- Type: enclosure box for tubular heater
- Application: heated Sandia extractors using the tubular heater configuration, including models listing this part in the machine parts breakdown such as the 86-4000-H
- Sold as: housing only. The heating element, thermostat and wiring are separate part numbers.
Sandia warranty
Sandia Products warrants vacuum motors for 2 years, 100 psi pumps for 2 years and all other pumps for 1 year, and parts, tools and accessories for 90 days. Coverage starts on the purchase date from an authorized distributor with proof of purchase. The warranty does not cover damage from improper or missing maintenance, misuse, tampering, substituted parts, pumps stored in freezing conditions, pumps run dry, powdered detergent, or systems not flushed regularly. Contact the manufacturer for an RMA before returning or replacing any part; unapproved work and non-Sandia parts void coverage.
Frequently asked questions
Does this include the heating element?
No. The 10-0906 is the enclosure box only. The tubular heater element, thermostat and wiring are separate Sandia part numbers -- order them alongside the box if you are rebuilding the whole heater section.
How do I know my machine uses the tubular heater box and not the dual rod box?
Check the parts list in your Sandia manual, or look at the component you are removing. Sandia lists a separate aluminum box, part 10-0921, for dual rod heater configurations. The two are not interchangeable.
Can I run the machine while I wait for the replacement box?
It is not advisable. The box positions the element and shields surrounding wiring and plastics from radiant heat, and it covers live electrical connections. Run the machine without heat, or leave it out of service, until the box is back in place.
Discount Cleaning Products is an authorized Sandia dealer and stocks Sandia service parts alongside the extractors they belong to. Orders ship from the United States and our support team can help you confirm the right part number against your machine before you buy.
