Heat is the difference between a rinse pass and a cleaning pass. The Sandia 10-0909-1-1 is the 1200 watt heater tube assembly specified for 100 psi Sandia extractors, and it is the service part that brings a cold machine back to hot-water performance without the expense of replacing the extractor. Solution temperature is what lets a truck-mount-style hot-water rinse happen out of a portable, and when the heat quits the machine still cleans -- just not nearly as well. Replacing the heat components is a routine service job, far cheaper than replacing the extractor.
Built for
- Carpet cleaning contractors running a 100 psi heated Sandia portable.
- Auto detailers extracting upholstery, carpet and mats where warm solution releases body oils faster.
- Property maintenance and janitorial teams servicing their own extraction equipment.
- Service shops keeping common Sandia heater assemblies on the shelf.
What it does
Solution from the tank passes through the heater tube on its way to the pump and wand, picking up heat from the 1200 watt element as it goes. Inline heating means there is no separate hot tank to fill and no long preheat -- the machine comes up to temperature and stays there while you work. At 1200 watts this assembly heats noticeably faster than the 600 and 875 watt Sandia elements, which is the reason it is the specified part on 100 psi machines rather than a smaller element.
Before you replace the element
Inline extractor heaters carry a thermostat at the end of the heater body that can trip and cut power to the element. Technicians on carpet and car-wash trade forums report this as the first thing to check on a no-heat call -- reset the thermostat and the heat often comes straight back. If the machine still runs cold after a reset, and the element reads open on a meter, the element or tube assembly is the part to change.
Sandia builds several heater configurations across the Sniper, Optimizer, Spot-Xtract and Indy lines, and they are not interchangeable. Match the part number on this page to the parts list in your machine's manual, or check the number stamped on the part you are pulling out, before you order.
Specifications
- Manufacturer: Sandia Products
- Part number: 10-0909-1-1
- Type: heater tube assembly
- Rated wattage: 1200 watts
- Pump pressure application: 100 psi Sandia extractors
Sandia warranty
Sandia Products warrants vacuum motors for 2 years, 100 psi pumps for 2 years and all other pumps for 1 year, and parts, tools and accessories for 90 days. Coverage starts on the purchase date from an authorized distributor with proof of purchase. The warranty does not cover damage from improper or missing maintenance, misuse, tampering, substituted parts, pumps stored in freezing conditions, pumps run dry, powdered detergent, or systems not flushed regularly. Contact the manufacturer for an RMA before returning or replacing any part; unapproved work and non-Sandia parts void coverage.
Frequently asked questions
My extractor stopped heating. Is the element always the problem?
No. Check the thermostat on the inline heater first -- it can trip and cut power without the element failing. Reset it and test. Only replace the element or tube assembly if the machine still runs cold and the element tests open.
How do I know this is the right part for my machine?
Match this part number against the parts list in your Sandia manual or against the number stamped on the component you are removing. Sandia uses different heater assemblies across model lines and wattages, and they do not cross over.
Should a technician install this?
Heater work involves mains voltage and plumbed solution lines. Unplug the machine and let it cool before opening it, and if you are not comfortable working around live electrical connections, have a manufacturer-authorized service provider do the job -- unapproved repairs can affect warranty coverage.
Will this fit a 500 psi machine?
No. Sandia specifies separate heater assemblies by pump pressure. This assembly is listed for 100 psi machines; 500 psi units use a different part number. Check your manual's parts list before ordering.
Discount Cleaning Products is an authorized Sandia dealer and stocks Sandia service parts alongside the extractors they belong to. Orders ship from the United States and our support team can help you confirm the right part number against your machine before you buy.
