Reliable Brio Pro 1000CC Commercial Steam Cleaner with Continuous Steam and 15-Piece Accessory Kit
The Brio Pro 1000CC is for the operator who has to sanitize surfaces all day and does not want to buy, store, mix and rinse chemicals to do it. It converts ordinary tap water into dry vapor steam at 87 PSI, which lifts baked-on grease, soap scum and grout soil and kills the great majority of bacteria on contact using heat alone. Reliable calls it their top-of-the-line commercial machine, and it is built in Italy around a 5-liter 18/10 stainless steel boiler and a 1750-watt heating element.
The two features that separate it from an entry-level steamer are continuous steam and the hot water rinse. Continuous steam supply means the tank can be refilled while the machine is under pressure, so a job does not stop for a cool-down and reheat cycle. The rinse setting blends hot water into the steam stream at roughly 228 grams per minute, which is what actually flushes the loosened soil off the surface instead of smearing it.
Built for
- Restaurants and commercial kitchens. Fryer surrounds, hood interiors, floor drains and the grout under prep tables, where degreasers are slow and leave residue that has to be rinsed.
- Schools and childcare. Sanitizing desks, restroom fixtures and high-touch surfaces without leaving chemical residue in rooms occupied by children.
- Healthcare and dental offices. Detail cleaning of fixtures, casters, chairs and hard-to-reach seams.
- Hotels and property management. Tile and grout restoration, mattress and upholstery refreshing, and turnover cleaning between guests.
- Auto detailing. Interior panels, vents, seats and engine bays, where the controlled moisture of dry vapor steam is an advantage over wet methods.
Why steam instead of chemicals
Vapor steam sanitizes with heat and moisture, so the only consumable is water. That removes the ongoing cost of degreasers and disinfectants, eliminates the chemical storage and mixing station, and removes the rinse-and-residue step that follows most chemical cleaning. It also reaches into grout lines, seams and crevices that a cloth cannot get into. EMC2 technology in the boiler helps soften hard water and reduce scale buildup, which is the failure that shortens the life of most commercial steamers.
Specifications
- Model: Reliable Brio Pro 1000CC
- Steam pressure: 6 bar / 87 PSI
- Heating element: 1750 watts
- Boiler and tank: 5 liters, 18/10 stainless steel
- Boiler temperature: 302 to 320 degrees F
- Steam tip temperature: up to approximately 260 degrees F
- Rinse output: 228 grams per minute of steam and hot water
- Steam ready time: approximately 6 to 7 minutes from cold
- Steam supply: CSS continuous steam - refill without depressurizing
- Scale control: EMC2 anti-scale technology
- Power cord: 5 meters (approximately 16 ft 4 in) with integrated cord wrap
- Accessories: 15-piece commercial accessory kit
- Country of manufacture: Italy
- Warranty: manufacturer lifetime boiler tank warranty plus 1-year limited parts and labor
Frequently asked questions
Can I refill the tank without shutting the machine down?
Yes. The continuous steam supply system lets you add water while the machine stays under pressure, so you do not have to wait through a cool-down and reheat in the middle of a job.
Does steam really sanitize without any chemicals?
Heat does the work. The Brio Pro produces dry vapor steam with a tip temperature near 260 degrees F, which kills the large majority of common bacteria and germs on contact. For any application governed by a health code or infection-control protocol, follow the disinfection procedure your facility is required to use.
Will hard water damage the boiler?
Scale is the usual cause of failure in commercial steamers. The 1000CC uses EMC2 technology to soften incoming water and slow mineral buildup inside the reservoir. Periodic flushing per the owner manual is still recommended in hard-water regions.
What comes in the 15-piece accessory kit?
A commercial-duty set of brushes, nozzles, squeegee and cloth tools made in Italy for the machine. The kit covers floors, tile and grout, glass, upholstery and detail work in tight seams and crevices.
Is it strong enough for kitchen grease?
Yes. At 87 PSI with a boiler running between 302 and 320 degrees F, it is used on fryer surrounds, hoods and grout in commercial kitchens. The hot water rinse setting is what carries the released grease off the surface.
How long does it take to be ready to use?
About 6 to 7 minutes from a cold start.
Discount Cleaning Products is an authorized dealer for the brands we carry, with US-based support from people who work with this equipment every day. If you are not sure which model or configuration fits your site, contact us before you order and we will help you match the specification to the job.
