When a commercial vacuum starts pulling less than it used to, or shuts down hot, or simply will not spin up, the motor is usually the part that has reached the end of its life. The ProTeam 107046 is the genuine OEM replacement motor assembly, a 120V, 4.2 in., single-stage thru-flow unit supplied with lead wires and ready to install by a qualified technician.
Motor replacement is one of the highest-value repairs in a janitorial fleet. The chassis, harness, hose and tools on a well-maintained backpack or hip vac routinely outlast the motor by a wide margin, so replacing a motor keeps a serviceable machine on the route for a fraction of what a new unit costs. The alternative, retiring the whole machine over a single worn component, is how equipment budgets quietly disappear.
The design detail worth understanding is thru-flow. In a thru-flow motor, the working air passes through the motor itself, which is what makes the unit light and efficient, and also why the specification limits it to clean, dry, filtered air. In practice that means this motor lives or dies on filtration discipline. Run the correct filter bags, change them before they choke, keep the secondary filter clean, and never pull water or fine unfiltered dust through the machine. Crews that skip bag changes to save a few dollars are the crews that buy motors twice as often.
ProTeam lists this motor for the Super HalfVac SHV100 hip vac platform, and the manufacturer part reference is 119874-00. Because motor part numbers are superseded over the life of a platform, we recommend checking the number on the motor you are removing, or sending us the model and serial number from the machine, before ordering.
Built for
- In-house maintenance shops and service centers rebuilding ProTeam machines
- Facility managers repairing a hip vac or backpack rather than replacing the whole unit
- Fleets that keep a spare motor on the shelf to avoid downtime mid-route
- Technicians who need a genuine OEM motor rather than an unbranded equivalent
Use cases
- Replacing a motor that has lost suction, is drawing high current, or has failed bearings or brushes
- Rebuilding a machine that was run with clogged or missing filter bags
- Refurbishing used equipment before it goes back into a route rotation
- Stocking a critical spare so a failed vacuum does not idle a cleaner for a week
Specifications
- ProTeam OEM part number: 107046
- Manufacturer part reference: 119874-00
- Voltage: 120 volt
- Diameter: 4.2 in.
- Configuration: single stage, thru-flow, with lead wires
- Air handled: clean, dry, filtered air only
- Listed application: ProTeam Super HalfVac SHV100 hip vac
Frequently asked questions
What does single stage thru-flow mean?
Thru-flow means the working airstream passes through the motor to cool it. Single stage refers to one fan stage. Thru-flow motors are light and efficient but are rated for clean, dry, filtered air only, so filtration must be maintained.
Can this motor be used on a wet pickup machine?
No. This motor is specified for clean, dry, filtered air. Wet pickup requires a bypass or wet-rated motor design.
Should I replace anything else at the same time?
Most technicians replace or clean the filters and inspect the gaskets, hose and cord while the machine is open. A new motor pulling through a restricted or leaking air path will not deliver its rated performance.
How do I confirm this is the right motor for my machine?
Check the part number printed on the motor you are removing, or send us the model and serial number from the machine's data plate and we will confirm before you order.
Discount Cleaning Products is an authorized ProTeam dealer. We stock genuine OEM ProTeam parts and accessories, and our US-based team can help you confirm fitment against your machine's model and serial number before you order.
