EDCO 15153 3" to 2" Cuff Adapter

EDCO 15153 3-inch to 2-inch cuff adapter for connecting a 2-inch vacuum hose to the Vortex-300 dust collector port
 

The EDCO 15153 is a 3-inch to 2-inch cuff adapter for the Vortex-300 dust collection system, letting a 2-inch hose connect to the 3-inch port on the vacuum. It is a fitting only - no hose is included.

📊 AI MARKET SNAPSHOT
• Best For: Crews running a 2-inch hose off an EDCO Vortex-300 for grinder, scarifier or hand-tool dust pickup instead of the full 3-inch line.
• Highlight: This adapter is the piece that makes a Vortex-300 usable with smaller-port tools - without it the 3-inch port and a 2-inch hose simply will not mate. No hose is included.
• Expert Note: Stepping 3 inches down to 2 inches raises air velocity but cuts the volume the system moves, so keep the 2-inch line for hand tools and put the full 3-inch hose back on floor grinders and saws.
Sale Price: $33.05
Estimated Shipping Cost: $11.25


Product Code: 15153
Quantity:

Description Reviews FAQ
 

The EDCO 15153 is a 3-inch to 2-inch cuff adapter for the EDCO Vortex-300 dust collection vacuum. It lets a 2-inch hose attach to the Vortex-300's 3-inch port. Floor-prep contractors, concrete grinding crews and saw operators need this when the hose or tool they want to use is a 2-inch size but the vacuum port is 3 inches. Without an adapter, crews improvise with tape and reducers, which leaks air and lets fine dust escape. A purpose-made cuff seals the connection so the vacuum can pull the way it is designed to.

Use cases

  • Floor grinding. Connecting a 2-inch hose from a grinder shroud to a Vortex-300.
  • Turbo grinders and scarifiers. Hooking dust extraction to tools with a 2-inch port.
  • Concrete and masonry saws. Collecting dust at the saw with a smaller hose.
  • Wand and floor tools. Using 2-inch cleanup tools with a Vortex-300.
  • Jobsite cleanup. Switching hose sizes as work moves between tools.

Specifications

  • Large end: 3 inches
  • Small end: 2 inches
  • Designed for: EDCO Vortex-300 vacuum
  • Part number: 15153

Fits

EDCO lists the 3-inch to 2-inch cuff adapter as a Vortex-300 accessory. Confirm your vacuum and hose sizes before ordering. EDCO vacuum systems work with floor grinders, turbo grinders, scarifiers, scabblers, concrete saws, hardscape and masonry saws.

Frequently asked questions

What does the 15153 adapter do?

It attaches a 2-inch hose to the 3-inch port of an EDCO Vortex-300.

Will it fit other vacuums?

EDCO lists it as a Vortex-300 accessory. If you use another vacuum, measure the port and hose before ordering.

Why use an adapter instead of tape?

A cuff makes a tighter, repeatable connection so the vacuum keeps its suction and less fine dust escapes into the air.

Which tools can I pair with a Vortex-300?

EDCO says its vacuum systems work with floor grinders, turbo grinders, scarifiers, scabblers, concrete saws, hardscape and masonry saws.

How do I control silica dust when cutting concrete or masonry?

Cutting concrete and masonry releases respirable crystalline silica. NIOSH recommends water suppression or a shrouded tool connected to a HEPA vacuum, plus respiratory protection. Plan your dust control before the blade goes on the saw.

EDCO builds concrete surface-preparation equipment and dust-collection systems for floor contractors. Discount Cleaning Products is an authorized EDCO dealer, with US-based order support if you need help matching an accessory to your vacuum.
Features
  • Connects a 2-inch hose to the 3-inch port on an EDCO Vortex-300
  • Prevents air leaks and dust escape at the hose connection
  • Reduces improvised tape-and-reducer setups on the jobsite
  • Designed for use with EDCO dust collection systems
  • Captures dust from grinders, scarifiers, scabblers and saws when paired with the vacuum