MK Diamond MK-303 4" (102mm) Professional Continuous Rim Lapidary Blade, Lapidary Blade # 153742

MK Diamond MK-303 4-inch (102mm) Professional Continuous Rim Lapidary Blade, Lapidary Blade # 153742

Alternative Views:

A 4 inch MK Diamond MK-303 professional continuous rim lapidary blade, 0.014 inch kerf, bored 1/2 inch. At 0.014 inch this is among the thinnest rims MK Diamond lists in the MK-303 range, meant for small rough where every bit of material counts.

📊 AI MARKET SNAPSHOT

• Best For: Rockhounds and cabochon cutters on a 4 inch trim saw with a 1/2 inch arbor, slicing small agate, jasper and quartz.

• Highlight: A 0.014 inch kerf takes almost nothing out of the stone, which is the whole argument for a sintered continuous rim over a notched rim or plated blade on valuable rough.

• Expert Note: A rim this thin will not tolerate side load, so let the saw feed the stone rather than twisting it through the cut. MK Diamond specifies a water soluble coolant for the MK-303.

Sale Price: $43.99

* Call 888-233-0851
Estimated Shipping Cost: Free Shipping Item

Product Code: 153742

Quantity:

Description

Reviews

FAQ

The MK-303 Professional grade diamond blade has been designed for cutting rare and valuable materials (i.e. agate, quartz, petrified wood, jasper, jade, etc) when waste needs to be held to a minimum and speed of cut is essential. The MK-303 produces smoother cuts, lasts longer and cuts faster than notched rim or plated diamond blades. Designed for use with a water soluble coolant. Blades 16" and larger have segmented rims.

MK-303 diamond blades should be dried and treated with an anti-rust lubricant for storage purposes.

Features

Continuous Rim

5mm Rim Height

Special arbors available upon request. Stock arbors can be bushed to smaller sizes. Please specify at time of order.