MK Diamond 5-Pack Sawtec 4-1/2" 36 Grit Abrasive Grinding Disc, Tile-Stone Grinding Disc # 167843
MK Diamond 5-Pack Sawtec 4-1/2-inch 36 Grit Abrasive Grinding Disc, Tile-Stone Grinding Disc # 167843
 
📊 AI-POWERED MARKET ANALYSIS
• Highlight: MK Diamond Sawtec 4-1/2-inch 36-grit discs are the finest disc in the Sawtec lineup, leaving a tight finish profile on tile and stone after the coarser 8, 16 and 24-grit passes have removed coatings, mastic or thin-set.
• Best For: Final finish prep on tile, stone and concrete, tight surface profiles ahead of thin-mil sealers, light scuff and de-glaze passes on previously coated floors.
• Expert Note: The 36-grit Sawtec is finer than the substrate spec for most flooring epoxies, so reserve it for sealer prep, light de-gloss work or stone refinishing rather than primary coating prep where a 16 or 24-grit profile is preferred.
Sale Price: $31.99
* Call 888-233-0851
Estimated Shipping Cost: Free Shipping Item


Free Shipping
Product Code: 167843
Quantity:

Description Reviews FAQ
 
Sawtec ZEK Abrasive Grinding Disks are long lasting, inexpensive, aggressive discs that are designed for removing mastic, epoxies, paint, urethane coatings, carpet glue and stucco off concrete. The silicon carbide material provides aggressive removal of coatings without loading up the disk. The reinforced plastic backing eliminates the need for backer pads. Two diameters are available: 4-1/2" and 7", both with 7/8"-5/8" arbors. Sawtec grinding disks meet Type 27 grinding wheel performance requirements, per ANSI B7.1. 8,500 Maximum RPM.
Features
  • 8 Grit Rough, aggressive removal of heavy coatings
  • 16 Grit Heavy-duty removal of mastic, epoxy and urethane coatings
  • 24 Grit Light-duty for light coating removal
  • Right-angle grinder adapter included.
    		•