This is a seven-pack of General Equipment 35HFC hardfaced dirt teeth for earth augers. Auger teeth are the wear item on a hole digger: they take the abrasion so the boring head does not, and they are meant to be replaced in the field on a regular schedule. General Equipment lists the 35HFC as the hardfaced version of its dirt tooth, distinct from the 35 standard dirt tooth, which carries its own part number. Utility, fencing, sign and landscape crews running General Equipment hole diggers are the buyers here.
Specifications
- Pack quantity: 7 teeth
- Type: hardfaced dirt tooth
- Material: hot forged steel alloy
- Heat treatment: quench and draw
- Retention: universal mounting tangs accepting both RUB-R-LOK and bolt-type socket retention
- Includes RUB-R-LOK spacers; General Equipment states RUB-R-LOK is included with all teeth
- Field replaceable
No Rockwell or Brinell hardness figure is published by General Equipment for this tooth, so none is stated here. Bolts are not included for the 4710 and 4750 Series, where they come as part of the auger assembly.
Fits
General Equipment lists 35HFCPAK7 as standard on 6.0 to 18.0 inch diameter augers in its 4400 Series, and in all socket positions on 4400, PLDBH, PSD and LDBH42 Series augers. It is also listed for the 4710, 4750, 6710 and 6750 Series, in all sockets on the 6-inch auger and in the two outside sockets on 8-inch and larger.
Teeth required per auger on the 4400, PLDBH and LDBH42 Series: one for a 6-inch, two for 8, 10 and 12-inch, three for a 14-inch, and five for 16 and 18-inch augers.
Compatible General Equipment machines include the 330H and 343H hole diggers, the 332H and 348H EPIC Series, the 660H DIG-R-MOBILE, and the 471, 553, 671 and 753 DIG-R-TACH.
Soil conditions
General Equipment states that all of its teeth are for earth digging applications only, in unconsolidated soils such as loams, sands and granular rubble, plus soft clay, sandstone, fractured limestone, caliche, compacted clays and rubble soil classifications. The teeth are not intended for digging holes in ice. Teeth can be installed in all boring head sockets with the hard-facing up.
Discount Cleaning Products is an authorized dealer with US-based service and support.
