Kirby 32 ft Power Cord, Black - Ultimate G and G Series, 192099
Kirby uprights routinely outlive several of their own cords, because the cord is the part that gets stepped on, rolled over and wrapped around the handle a few thousand times. This is the genuine-specification 32 ft black replacement cord, part 192099, for the Ultimate G and the G series machines. On a vacuum that is otherwise built to run for decades, it is the repair that keeps it in service.
Built for
- Kirby Ultimate G and Ultimate G Diamond Edition uprights
- Kirby G3, G4, G5 and G6 uprights
- Kirby Sentria and Diamond Edition machines
- Owners whose cord is frayed at the strain relief or the plug
- Vacuum repair shops servicing Kirby machines
Use cases
Fixing the most common Kirby failure that is not the belt. The classic failure point is where the cord exits the machine and where it enters the plug - the two places it flexes every single time the vacuum is wound up and put away. Symptoms usually start intermittently: the machine cuts out when the cord is moved, or only runs when the cord is held at a certain angle. That is a cord to replace now, not later.
Keeping a machine worth keeping. A Kirby is a heavy, all-metal machine that people keep for twenty years and pass down. Against that service life a cord is a wear item, and replacing it rather than living with a taped or intermittent cord is both the safer and the cheaper decision.
Getting the right length. Kirby supplied these machines with cords in more than one length, and 32 ft is the standard fitment for the G series. There is also a 50 ft cord used on some configurations, so if reach matters to you it is worth measuring the old cord before ordering rather than assuming.
Specifications
- Brand: Kirby
- Part number: 192099
- Alternate references: K-192099, 49-5825-01
- Length: 32 ft
- Color: black
- Configuration: 2-prong, 120V
- Fits: Ultimate G, Ultimate G Diamond Edition, G3, G4, G5, G6, Sentria, Diamond Edition
Frequently asked questions
Which Kirby models does this cord fit?
It fits the Ultimate G and Ultimate G Diamond Edition, the G3, G4, G5 and G6, and the Sentria and Diamond Edition machines. It is referenced as part 192099, and also appears as K-192099 and 49-5825-01.
How long is this cord?
It is 32 ft, which is the standard fitment for the G series. Kirby also used a 50 ft cord on some configurations, so measure your existing cord if you are unsure which one came on your machine.
How do I know the cord is what failed?
The telltale sign is intermittent operation tied to cord position - the machine stops or starts when the cord is flexed, particularly near the plug or where it enters the body. Visible fraying, exposed conductors or a plug that runs warm are also clear indications.
Can I replace the cord myself?
It is a common owner and shop repair on these machines, requiring the handle assembly to be opened to reach the terminals. Unplug the vacuum before starting, and if you are not comfortable with the wiring, any Kirby service shop can do it quickly.
Is a damaged cord safe to keep using?
No. A cord with exposed conductors or a damaged jacket is a shock and fire risk, and intermittent contact also arcs, which damages the switch and motor over time. Replace it rather than taping it.
Discount Cleaning Products is an authorized dealer stocking genuine and OEM-equivalent replacement parts for commercial and household floor care equipment. Our US-based staff works with these machines every day, so if you are not certain which part your model takes, send us the model and serial number off the data plate and we will confirm the correct fit before you order.
