FitAll Floor and Rug Tool with Wheels, 1-1/4 inch, Gray
Almost nobody has a house or a job site that is all one flooring type. There is tile in the entry, wood or laminate through the main rooms, and area rugs on top of both. A dedicated bare-floor brush handles the first two and pushes debris around on the third; a dedicated rug tool does the reverse. This FitAll combination tool exists so you stop carrying two attachments and swapping them at every threshold.
It is also the practical answer when the original tool that came with a vacuum finally cracks. FitAll attachments are built to the common 1-1/4 inch fitting rather than to one manufacturer proprietary size, so a broken floor tool does not have to mean tracking down a discontinued OEM part.
Built for
- Mixed-surface homes and offices with hard floors and area rugs in the same run.
- Bare floors, where the brush strip sweeps dust and grit without scratching wood, tile, laminate or vinyl.
- Area rugs and low-pile carpet, where a smooth face glides instead of grabbing.
- Replacing a worn or broken floor tool on any vacuum using a 1-1/4 inch wand.
Why the wheels matter
A wheeled floor tool tracks straight and stays at a consistent height above the floor. That does two things: it keeps the airflow gap even so suction stays predictable across the width of the tool, and it stops the leading edge from dragging on finished floors. Tools without wheels tend to nose down under suction, which is what causes the squeal and the scuff marks people blame on the vacuum.
Check your wand size first
This tool is built for 1-1/4 inch, the most common wand size across household and light commercial vacuums. It is not the only size in use, so measure the outside diameter of your wand end before ordering rather than assuming. If your machine uses 1-1/2 inch, this is the wrong fitting and we can point you to the right one.
Specifications
- Type: combination floor and rug tool
- Fitting: 1-1/4 inch
- Color: gray
- Brand: FitAll
- Features: wheels for smooth gliding, brush strip for bare floors
Frequently asked questions
Will this fit my vacuum?
It fits vacuums that use a 1-1/4 inch wand, which covers a large share of household and light commercial machines. Measure your wand before ordering. If you send us your vacuum brand and model, we will confirm the fitting.
Is it safe on hardwood floors?
Yes. It is designed for bare floors including wood, tile, laminate and vinyl, with a brush strip that sweeps rather than scrubs and wheels that keep the body off the finish. As with any tool, keep grit off the wheels and inspect the brush strip periodically for embedded debris.
Can it replace a powered carpet head?
No. This is a passive tool with no motorized brush roll. It works well on bare floors, area rugs and low-pile carpet. For deep or plush carpet you still want a powered brush roll head.
Why buy an aftermarket tool instead of the original manufacturer part?
Cost and availability. FitAll builds to the standard 1-1/4 inch fitting rather than a proprietary one, so it is usually cheaper than an OEM tool and still available long after a manufacturer discontinues parts for an older machine.
How do I keep it working well?
Clear hair and thread from the wheels and the brush strip. A tool that stops gliding smoothly almost always has something wound around an axle rather than a worn-out body.
Discount Cleaning Products is an authorized dealer for the commercial cleaning brands we carry, with US-based support from people who work with this equipment every day. If you are unsure which part or configuration fits your machine, send us your model and serial number and we will confirm the correct item before you order.
