There are two ways a powerhead brush goes bad. The bristles wear down, which a bare replacement brush fixes, or the assembly itself starts to bind - and a binding assembly is what actually kills powerheads. It drags, it heats, it eats belts and it puts load on a motor that was never meant to fight friction. Service techs on vacuum repair forums say the same thing repeatedly: once an assembly no longer spins freely by hand, replace it rather than nurse it.
The Sandia 10-0164-E is the complete OEM brush assembly for the 10-0164 powerhead used on Sandia Raven 6-quart and 10-quart backpack vacuums. It is the part you order when a machine is worth keeping and you want the repair done in a single swap instead of chasing symptoms across a busy cleaning season.
Built for
- Rebuilding a powerhead that drags, rattles or no longer turns freely by hand
- Full-service overhaul on a backpack vacuum being returned to a route after storage
- Fleet standardization, where every machine gets the same assembly at the same interval
- Fixing a head that keeps chewing through belts or running hot
Why crews order this part
- Replaces the whole rotating assembly in one repair, so you are not diagnosing the same head twice
- Removes drag from the motor, which is the load that shortens powerhead life
- OEM fit means no shimming, filing or improvised bearings to make it seat
Specifications
- Sandia service part for the 10-0164 Powerhead Kit
- 10-0164 Powerhead Kit includes the wand, electrical fittings and vacuum head
- Listed by Sandia as an accessory for the Raven 6-quart and 10-quart backpack vacuums
Sandia Warranty Policy
Sandia is committed to deliver the best quality, and our products are covered by a comprehensive warranty.
- 2-year warranty on all vacuum motors
- 2-year warranty on 100 psi pumps only. 1-year warranty on all other pumps
- 90-days on parts, tools, and accessories.
Frequently asked questions
What is the difference between this and the 10-0164-C?
The 10-0164-C is the replacement brush. The 10-0164-E is the complete brush assembly, which is the part to order when the assembly itself is binding rather than just worn.
How do I tell which one I need?
Spin the brush by hand with the machine unplugged. If it turns freely and only the bristles are short, the brush will do. If it is stiff, noisy or wobbles, replace the assembly.
Which machines is it for?
The 10-0164 powerhead is offered by Sandia for the Raven 6-quart and 10-quart backpack vacuums.
Is this a genuine Sandia part?
Yes. It is the OEM Sandia service part for that powerhead.
Discount Cleaning Products is an authorized Sandia dealer. We stock the Raven backpack line and its service parts together, so the part you order is the OEM part that matches the machine rather than a generic substitute, and our US-based team can help you confirm the right number off your parts list before you order.
