Everything a hard surface spinner does depends on the jets. They convert pump pressure into the working spray that lifts soil out of grout lines and off textured tile, and when they wear or partially clog, pressure at the pump can read perfectly normal while the floor comes out streaked. The Sandia 10-0864-JET is the genuine replacement jet for the 15-inch turbo spinner tool. This tool takes two jets, so order a pair to keep the spray pattern balanced.
That last point matters more than it sounds. Replacing one jet and leaving the other in place gives the head two different flow rates and two different patterns, which produces exactly the uneven result you were trying to fix. Tile and grout specialists, restoration technicians, and facility crews who run these tools on restrooms, kitchens, and entryways replace jets in matched pairs and treat them as a consumable, alongside the brush ring.
Built for
- Restoring an even spray pattern on a 15-inch spinner that has started cleaning in streaks
- Replacing jets that have partially clogged from hard water scale or detergent residue
- Scheduled consumable replacement in matched pairs on daily production tools
- Bringing a used or long-stored 15-inch turbo tool back to full cleaning performance
- Keeping a spare pair on the truck for restroom, kitchen, and entryway contracts
Specifications
- Manufacturer: Sandia Products
- Part number: 10-0864-JET
- Category: Hard surface spinner tool jet
- Quantity required: Two per tool, sold individually
- Fits: Sandia 10-0864 15-inch hard surface turbo spinner tool
- Warranty: Sandia covers parts, tools and accessories for 90 days. Vacuum motors carry a 2-year warranty; 100 psi pumps carry 2 years and all other pumps 1 year. Sandia covers up to one year of service labor at the manufacturer rate through an authorized service center.
The Sandia warranty does not cover failures caused by improper or missing maintenance, misapplication, misuse, tampering, or substitution of supplied parts. It also excludes pumps stored in freezing conditions, pumps run dry for extended periods, use of powdered detergent, failure to flush the system regularly with a vinegar solution, filters removed from the solution tank, and inline filters that are not cleaned regularly.
Frequently asked questions
Why do I need to order two?
The 15-inch turbo tool uses two jets. Replacing them as a pair keeps flow and spray pattern matched across the head, which is what produces an even clean. Mixing a new jet with a worn one reintroduces the streaking you were trying to eliminate.
How do I know a jet is worn or clogged?
Look for streaked or patchy cleaning, a visibly uneven spray fan, or lower flow with normal pump pressure. A jet that has eroded will flow more than spec and drop pressure; one that has scaled will flow less. Both show up on the floor before they show up on a gauge.
What causes jets to clog?
Hard water scale, powdered detergent, and neglected inline filters are the usual culprits. Sandia's warranty specifically excludes damage from powdered detergent and from filters that are not cleaned regularly, so liquid chemistry and clean filters are worth the discipline.
Can I clean a jet instead of replacing it?
A light scale deposit can sometimes be dissolved by soaking in a vinegar solution, which is also the flush Sandia recommends for the system generally. Never poke a jet orifice with wire; that changes the orifice size permanently and ruins the pattern.
Will a jet from another tool fit?
Jets are sized to the tool and its working pressure. Use the jet specified for the 15-inch turbo tool rather than one borrowed from a wand or a different spinner, or the flow and pattern will be wrong.
Discount Cleaning Products is an authorized Sandia dealer, so every part on this page is a genuine Sandia component built to the same tolerances as the one that shipped with your machine. Our US-based team works with these extractors every day and can help you confirm the right part number for your serial number before you order, which is usually faster than pulling the machine apart twice. If you keep a small shelf of wear parts on hand, you spend your day cleaning instead of waiting on a repair.
