When a heated Sandia extractor starts putting down lukewarm solution, the crew notices before the customer does -- soils release slower, rinse passes multiply and the job runs long. The Sandia 10-0905-A is the single-tube 600 watt heater tube assembly that restores that heat, and it is the part carpet cleaners, auto detailers and in-house facility techs reach for when a heated Sandia unit goes cold. Solution temperature is what lets a truck-mount-style hot-water rinse happen out of a portable, and when the heat quits the machine still cleans -- just not nearly as well. Replacing the heat components is a routine service job, far cheaper than replacing the extractor.
Built for
- Carpet cleaning contractors keeping a heated portable extractor in service through a busy season.
- Auto detail shops running heated interior extraction on upholstery and floor mats.
- Facility and janitorial maintenance techs who service their own equipment in-house.
- Equipment service providers stocking common Sandia heat components.
What it does
The tube assembly is the heat exchanger the solution passes through on its way to the wand. Cold water enters, picks up heat from the 600 watt element as it travels the tube, and leaves hot enough to help lift greasy and oily soils that cold water will only smear. A 600 watt draw is deliberately modest -- it keeps the machine inside the amperage budget of a single household or office circuit, which matters when you are plugged into a wall outlet in an occupied building rather than a dedicated service panel.
Before you replace the element
Inline extractor heaters carry a thermostat at the end of the heater body that can trip and cut power to the element. Technicians on carpet and car-wash trade forums report this as the first thing to check on a no-heat call -- reset the thermostat and the heat often comes straight back. If the machine still runs cold after a reset, and the element reads open on a meter, the element or tube assembly is the part to change.
Sandia builds several heater configurations across the Sniper, Optimizer, Spot-Xtract and Indy lines, and they are not interchangeable. Match the part number on this page to the parts list in your machine's manual, or check the number stamped on the part you are pulling out, before you order.
Specifications
- Manufacturer: Sandia Products
- Part number: 10-0905-A
- Type: heater tube assembly, single tube
- Rated wattage: 600 watts
- Application: heated Sandia extractors using the single-tube heater configuration
Sandia warranty
Sandia Products warrants vacuum motors for 2 years, 100 psi pumps for 2 years and all other pumps for 1 year, and parts, tools and accessories for 90 days. Coverage starts on the purchase date from an authorized distributor with proof of purchase. The warranty does not cover damage from improper or missing maintenance, misuse, tampering, substituted parts, pumps stored in freezing conditions, pumps run dry, powdered detergent, or systems not flushed regularly. Contact the manufacturer for an RMA before returning or replacing any part; unapproved work and non-Sandia parts void coverage.
Frequently asked questions
My extractor stopped heating. Is the element always the problem?
No. Check the thermostat on the inline heater first -- it can trip and cut power without the element failing. Reset it and test. Only replace the element or tube assembly if the machine still runs cold and the element tests open.
How do I know this is the right part for my machine?
Match this part number against the parts list in your Sandia manual or against the number stamped on the component you are removing. Sandia uses different heater assemblies across model lines and wattages, and they do not cross over.
Should a technician install this?
Heater work involves mains voltage and plumbed solution lines. Unplug the machine and let it cool before opening it, and if you are not comfortable working around live electrical connections, have a manufacturer-authorized service provider do the job -- unapproved repairs can affect warranty coverage.
Why only 600 watts?
A 600 watt element keeps total machine draw low enough to run from a standard building circuit without tripping a breaker. Higher-wattage Sandia heaters heat faster but need more available amperage.
Discount Cleaning Products is an authorized Sandia dealer and stocks Sandia service parts alongside the extractors they belong to. Orders ship from the United States and our support team can help you confirm the right part number against your machine before you buy.
