Kit B is the working set for crews who need the MegaVac to vacuum hard floors, detail the edges, and blow out a bay - without paying for a second floor head they will not use. ProTeam's 106986 bundles the blower tool with a horse hair hard surface floor tool, a crevice tool, a dust brush and a two-piece two-bend aluminum wand. It is aimed at facility maintenance, restoration and contractor crews who run a MegaVac as their one dry-pickup machine.
Built for
- General hard-floor vacuuming on tile, VCT, sealed concrete and finished surfaces
- Blow-down of entries, walkways, equipment bays and loading docks
- Edge and corner detail on the same wand as the floor work
- Single-machine routes where a second vacuum is not practical
What is in Kit B
ProTeam lists Kit B as a blower tool, dust brush, crevice tool, horse hair hard floor tool and a two-piece, two-bend aluminum wand. The distinction from Kit A is straightforward: Kit A adds a second 14-inch floor head with a scalloped felt brush for hardwood and high-polish work. If your floors are ordinary commercial hard surface, Kit B carries everything you will actually reach for.
Why horse hair on a hard floor head
Horse hair is soft enough to run on finished surfaces without the marking risk of a stiff nylon strip, while still moving grit and dry soil ahead of the inlet. ProTeam also builds a horse hair and nylon blend for crews that want a little more aggression on unfinished or heavily soiled floors. Either way, the brush is doing the work of a dust mop while the vacuum captures what the mop would otherwise push into a corner.
The blower side
The blower tool redirects the MegaVac's airflow so the same machine can clear an entry mat, push standing water toward a drain, blow down a mechanical room, or speed drying after wet work. For a crew working out of a van, that is one less piece of equipment to load and maintain.
The wand and detail tools
The two-piece, two-bend aluminum wand angles the floor tool into the surface while the operator stands upright, and separates into a short wand for stairs, upholstery and close work. The crevice tool handles tracks, corners and the gap along fixed equipment; the dust brush covers ledges, panels, sills and fixtures.
Specifications
- Manufacturer: ProTeam
- Part number: 106986
- Kit contents: blower tool, horse hair hard surface floor tool, crevice tool, dust brush, two-piece two-bend aluminum wand
- Coupling: 1.5-inch
- Intended machine: ProTeam MegaVac
Frequently asked questions
How is Kit B different from Kit A?
Kit A includes two 14-inch hard floor heads - a scalloped felt brush head and a horse hair head. Kit B includes the horse hair head only. Everything else - blower tool, crevice tool, dust brush, two-bend wand - is common to both.
Which kit should I buy for a building with hardwood?
Kit A. The scalloped felt head is ProTeam's recommendation for hardwood and high-polished finishes. Kit B's horse hair head is aimed at general commercial hard floor.
Can the MegaVac really be used as a blower?
Yes - that is what the blower tool in this kit is for. It redirects the machine's airflow so you can blow down entries, bays and walkways or speed drying without a second machine.
Will the horse hair brush scratch a finished floor?
Horse hair is the soft option in ProTeam's brush line, chosen specifically to avoid marking finished surfaces. Stiff nylon is the more aggressive alternative for unfinished or heavily soiled floors.
Does the wand come apart?
Yes. It is a two-piece, two-bend aluminum wand. A single section works as a short wand for stairs, upholstery and close detail work.
Discount Cleaning Products is an authorized dealer for the brands we carry. Orders are picked and shipped from US-based stock, and our team can help you confirm wand couplings, tool widths and fitment before you order so the kit works with the machine you already run.
