The MK Diamond MK-414D 9-inch blade is a laser welded segmented blade from the MK-414D family of Standard Grade high speed blades for hard brick. It is made for dry cutting brick and masonry block, so masons and hardscape crews can make fast, repeatable cuts with a saw that takes a 9-inch blade. Ten millimeter segments give a good working depth of diamond for a long day of brick cutting.
Use cases
- Cutting hard face brick and masonry block for walls and repairs
- Fitting brick and pavers around corners, edges, and openings
- Masonry contractors who dry cut a lot of brick with a 9-inch saw
- Facility and restoration crews doing brick repair work
Choosing the right one
Check the diameter, the 7/8 inch arbor, and your saw rated RPM against this 9-inch blade before ordering. The MK-414D family is built around hard brick and block. For general purpose masonry on a smaller grinder, the MK-925D continuous rim is a different style, and our team can help you choose.
Tips for best results
- Check that the blade diameter, arbor, and maximum RPM rating match your saw before you mount it, and never run a blade above its rated speed.
- Let the diamonds do the work. Steady, moderate pressure gives a straighter cut and longer blade life than forcing the blade through the material.
- Inspect the blade before each use for cracks, missing segments, or a warped core, and replace it if you see damage.
- Cutting masonry, concrete, and asphalt creates fine dust that can contain silica. Wear eye protection and a suitable respirator, and use dust control methods that fit your job site.
- Store blades flat or hanging in a dry place so the core stays true and the segments stay protected.
Specifications
- Manufacturer: MK Diamond Products
- Model: MK-414D Standard Grade Blade for Hard Brick
- Part number: 151814Y
- Diameter: 9 inch (229mm)
- Blade width: .090 inch
- Arbor: 7/8 inch
- Construction: laser welded segments
- Segment height: 10mm
- Cutting method: dry cutting
- Materials: hard brick and masonry block
Frequently asked questions
What is the MK-414D made to cut?
MK Diamond lists the MK-414D family as blades for hard brick, used for dry cutting brick and masonry block.
What arbor does this 9-inch blade have?
It has a 7/8 inch arbor and a .090 inch blade width. Confirm the arbor matches your saw before ordering.
Is this a dry cutting blade?
Yes. The MK-414D family is described by MK Diamond for dry cutting masonry materials.
What does laser welded mean?
The diamond segments are laser welded to the steel core, a bond designed to handle the heat and stress of dry cutting.
Discount Cleaning Products is an authorized dealer for MK Diamond and a US-based team that can help you match the right blade to your saw and job. Questions about fit, arbor size, or availability? Contact us and we will help you get it right the first time.
