The MK Diamond MK-8500 is an 8-inch Supreme Grade V-segment crack chaser blade in the .500-inch width. Crack chasers rout and widen existing cracks in concrete and asphalt so the crack can be cleaned out and filled properly, and the V-shaped segments let the blade follow the crack rather than cut a fresh straight kerf.
Use cases
- Routing cracks in concrete slabs and pavement before sealant or caulk goes in
- Widening and opening cracks so backer rod and sealant have room to bond
- Municipal maintenance crews and sealing contractors preparing crack repair work
- Concrete repair crews on driveways, parking lots and warehouse floors
Specifications
- MK Diamond part number: 151938
- Model: MK-8500
- Blade type: Supreme Grade V-segment crack chaser
- Diameter: 8-inch (203mm)
- Width: .500-inch
- Arbor: 1-inch, per MK for the MK-CC100 saw
- Designed for the MK-CC100 crack chasing saw
Choosing a width
MK publishes this 8-inch blade in .250, .375 and .500-inch widths. The .500-inch is the widest, giving the most room for sealant on larger or heavily spalled cracks. A routed crack takes and holds sealant far better than a raw one, which is the point of the job.
Frequently asked questions
What is a crack chaser blade used for?
It routs and widens an existing crack in concrete or asphalt so it can be cleaned out and filled properly.
Which saw does the MK-8500 fit?
MK lists these 8-inch V-segment blades for the MK-CC100 crack chasing saw. Confirm your saw's arbor before ordering.
What is the difference between the MK-8250, MK-8375 and MK-8500?
They are the same 8-inch V-segment design in three widths: .250, .375 and .500-inch. This one is the .500-inch.
Does it cut wet or dry?
MK publishes its crack chasers as dry cutting blades intended to cut down resealing time.
Discount Cleaning Products is an authorized dealer for MK Diamond, Edco and Aztec equipment and parts, with US-based order support. Contact us with your machine model if you are unsure about fit.
