The MK Diamond MK-7601W 14-inch blade is a professional grade diamond blade for green concrete with hard aggregate, made for contractors who run high horsepower flat saws and need a blade that holds its cut from the first joint to the last. It is part of MK Diamond's Pro Series, engineered for demanding daily saw work rather than occasional use.
Built for
- Concrete contractors saw-cutting control joints in fresh slabs
- Flatwork and paving crews working with hard aggregate mixes
- Saw shops and rental yards stocking a dependable pro blade
- Industrial floor crews cutting green concrete on flat saws
Why contractors and hobbyists pick this blade
Match the blade to the material and the saw. Check that the diameter and 1-inch arbor suit your machine, keep water flowing if your saw is set up for wet cutting, and let the diamond cut at the pace the blade was designed for. A correctly matched blade cuts faster, wears more evenly and keeps your crew on schedule.
Sizing and ordering are straightforward. Confirm the maximum blade diameter your flat saw is rated for, check the arbor size, and think about the typical depth of cut you make. If your project calls for a special width, diameter or arbor, MK Diamond offers additional options on request, and our team can help you work out the right specification before you order.
Care and handling pay off. Inspect the blade for cracks or uneven segment wear before each job, mount it so it spins in the direction marked on the core, and use the water and speed recommended for your saw. Consistent habits keep cuts straight and extend blade life, which lowers your cost per cut over the long run.
Specifications
- Model: MK Diamond MK-7601W, 14-inch diameter
- Application: green concrete with hard aggregate
- Saw type: designed and engineered for high horsepower flat saws
- Construction: laser welded, 10mm segment height
- Arbor: 1-inch standard across the line. Other diameters, widths and special arbors are available on request
- The MK-7601W is made for newly poured concrete with tough aggregate. Trapezoid undercut protection is included on the 14 to 18-inch sizes, and widths from .125 to .250 inch are offered depending on diameter.
Frequently asked questions
What is the MK Diamond MK-7601W blade designed to cut?
It is designed for green concrete with hard aggregate and is engineered for use on high horsepower flat saws.
What saw does it need?
MK Diamond designs the Pro Series for high horsepower flat saws. Match the blade diameter and arbor to your saw before ordering.
What arbor does it fit?
The MK-7601W line uses a standard 1-inch arbor. Special arbors and other sizes are available on request.
Is the segment laser welded?
Yes. The MK-7601W uses laser welded construction with 10mm segment height.
Can I order a custom size?
Additional diameters, widths and special arbors can be requested. Contact us with the size you need.
Use cases
Typical jobs: green concrete with hard aggregate
Discount Cleaning Products is an authorized MK Diamond dealer based in the United States, with knowledgeable service if you need help matching a blade to your saw or arbor.
