The EDCO 63026 exhaust box sealing strips seal the exhaust box on the CD-5 five-head air-powered Crete-Crusher scabbler. The scabbler runs on compressed air and vents through the exhaust box, and the strips close the gap between that box and the cylinder block so exhaust and debris go where they belong rather than into the operator's working area. They are a routine wear item on a machine that vibrates continuously by design.
Specifications
- Two strips, 1/2 inch wide by 3/8 inch thick by 7 inches long
- Two strips, 1/2 inch wide by 3/8 inch thick by 13-1/2 inches long
- EDCO part number 63026, listed in the CD-5 parts manual as Sealing Strips, Exhaust Box
EDCO does not publish the strip material or durometer, so neither is stated here. EDCO's parts manual describes 63026 as a set containing all four strips listed above, while at least one distributor lists the same number as two each. If the exact count matters for your repair, contact us to confirm the pack quantity before ordering.
Fits
EDCO's parts list for the CD-5 five-head air-powered scabbler, machine part number 63100, shows 63026 as item 8 in the cylinder block grouping, between the exhaust box (63102) and the grommet (63110). The CD-3 uses a different sealing strip, EDCO part 63224, so this part should not be ordered for a CD-3. Confirm fitment against your machine's model number before ordering.
Discount Cleaning Products is an authorized dealer for EDCO concrete surface preparation equipment, with US-based help identifying parts from EDCO's manuals.
