The BE Pressure 90.393.112 is a 1-1/2" Type D aluminum camlock fitting built for fast, tool-free connect/disconnect on pressure washer hoses and water supply lines. The female cam-and-groove coupler end locks onto any matching male camlock adapter, while the female NPT-threaded end screws directly onto pump outlets, hose barbs, or pipe fittings. Pressure washing contractors, mobile wash operators, and equipment maintenance techs rely on this style of fitting to standardize hose connections across a fleet while keeping a leak-resistant, gasket-sealed joint that holds up to daily field use.
Use Cases / Best For
- Replacing a worn, cracked, or leaking camlock fitting on an existing pressure washer hose or water supply line
- Building a custom hose reel or hose-lay setup that needs a quick-connect junction point
- Connecting water tanks or buffer tanks to a trailer-mounted or truck-mounted rig
- Standardizing multiple hoses and wands across a fleet so any hose connects to any inlet
- On-site field repairs - swap a single fitting instead of replacing an entire hose assembly
Specifications
- Size: 1-1/2"
- Coupling Type: Type D (female camlock coupler x female NPT/FPT thread)
- Material: Cast aluminum, commonly heat-treated for durability and corrosion resistance
- Typical Pressure Rating: Up to approximately 250 PSI at 70 degrees F, standard for 1-1/2" aluminum camlock couplings (verify against your specific pump and hose ratings)
- Connection Style: Tool-free cam-arm locking mechanism on the coupler end
Frequently Asked Questions
What does the "Type D" designation mean on a camlock fitting?
Type D camlock fittings are a female cam-and-groove coupler paired with female pipe threads (FPT). The cam-lever end locks onto any correctly sized male camlock adapter, while the threaded end screws onto a male-threaded fitting such as a pipe nipple, hose barb, or pump outlet.
Will this fitting work with camlock fittings from other brands?
Yes. Camlock couplings follow a standardized cam-and-groove design, so a properly sized Type D coupler will lock onto any matching male camlock adapter (Type A, C, E, or F) regardless of manufacturer, as long as the sizes match.
Is aluminum camlock durable enough for daily pressure washing use?
Aluminum camlock fittings are cast from a corrosion-resistant alloy, making them lightweight, rust-resistant, and able to hold up to repeated connect/disconnect cycles. Stainless steel is sometimes preferred for aggressive chemical use, but aluminum is standard for clean water lines.
What pressure rating does this fitting handle?
1-1/2" aluminum camlock fittings are typically rated up to roughly 250 PSI at 70 degrees F, which covers most pressure washer water-supply-side connections. Always check total system pressure against pump and hose ratings before installation.
How do I replace the gasket if the fitting starts leaking?
Release the cam arms, remove the old gasket from inside the female coupler, seat a new gasket of the matching size, and reclose the arms. A worn or cracked gasket is the most common cause of a camlock leak.
Discount Cleaning Products is an authorized dealer of BE Pressure equipment and parts, stocking genuine camlock fittings and replacement components for BE-brand pressure washers. Choosing a genuine BE Pressure fitting helps ensure correct sizing and a reliable seal compared to generic off-brand alternatives.
