Replacement Sediment Filter for IPC Eagle RO/DI Water-Fed Pole Carts
Professional window cleaners running an IPC Eagle 5-Stage RODI cart depend on clean, spot-free water to finish glass, frames, awnings, and facades without streaks, rewipes, or callbacks. The BD515060 sediment filter is the first line of defense in that system. It strains sand, rust, silt, and other solid particles out of incoming tap water before that water ever reaches the carbon, RO membrane, and DI resin stages downstream. Keeping this filter fresh protects the more expensive components in the cart, keeps flow rate consistent on the truck or van, and helps the system hold a true 0 TDS finish job after job.
Built For
- Pre-filtering incoming tap water before it reaches the RO membrane
- Protecting the DI resin cartridge from sediment load and early exhaustion
- Maintaining a 0 TDS, spot-free finish on glass, frames, awnings, and signs
- Keeping flow rate and pump pressure consistent on IPC Eagle RODI carts used daily in the field
Specifications
- Fits IPC Eagle 5-Stage RODI Series water purification carts
- Compatible with both the Electric (RODIE) and Battery (RODIB) versions
- Recommended replacement: every 84 hours of use on the Electric version (RODIE)
- Recommended replacement: every 168 hours of use on the Battery version (RODIB)
- Positioned as the first-stage filter, ahead of the carbon, RO, and DI stages
Frequently asked questions
How often should I replace the BD515060 sediment filter?
Replace it every 84 hours of run time on the Electric (RODIE) version, or every 168 hours of run time on the Battery (RODIB) version. Crews running the cart daily on hard or high-sediment tap water may need to shorten that interval to keep the downstream RO and DI stages working efficiently.
How can I tell the filter is due for a change before the hour count catches up?
Watch for a drop in flow rate or output pressure from the cart, or pull the housing and check whether the cartridge looks visibly dirty, discolored, or caked with sediment. A restricted sediment filter forces the pump to work harder and can shorten the working life of the RO membrane and DI resin behind it, so it is worth checking between scheduled changes on dirty water sources.
Does a dirty sediment filter affect my TDS readings?
Indirectly, yes. The sediment filter itself does not remove dissolved solids, but a clogged filter reduces flow and pressure feeding the RO membrane, which can push that stage outside its rated efficiency and let more dissolved solids through to the DI resin. If your final TDS reading starts climbing above 0-10 ppm and glass is spotting after it dries, check the sediment filter along with the carbon, RO, and DI stages before assuming the DI resin is exhausted.
Is this filter difficult to install?
No. The sediment filter is a standard cartridge that drops into the existing housing on the IPC Eagle RODI cart. No tools beyond a filter housing wrench are typically needed, and most techs can complete the swap in the field in a few minutes between jobs.
Discount Cleaning Products is an authorized IPC Eagle dealer with US-based service and support to help match this filter to the correct RODI cart model and keep water-fed pole systems running to spec, load after load.
