Shag and frieze carpet does not fail because it wears out. It fails because the pile lies down, mats into traffic lanes, and stops looking like carpet. A vacuum floor head skims across the top of that pile without reaching the problem. A rug rake does. This is a passive grooming rake that mounts on any standard 1-1/4 inch vacuum wand and combs the pile back upright while suction pulls out what the raking releases.
Built for
- Matted high-traffic lanes. Hallways, in front of sofas, the path from the door - the places where frieze crushes first and most visibly.
- Pre-vacuum agitation. Raking drags embedded pet hair, sand and grit up from the base of the pile where suction alone cannot reach it.
- Post-extraction grooming. Carpet cleaners finish a job by setting the pile direction, which is both a presentation step and a drying one.
- Turnovers and showings. Property managers, hospitality staff and anyone presenting a space get an immediate visible result - the pile stands up and vacuum tracks disappear.
Why a rake and not a power nozzle
A rotating brushroll is built for cut pile at a modest height. On long shag or a tight frieze twist it does one of two things: it rides on top and accomplishes nothing, or it grabs fibers and tangles. Neither helps. The rake's teeth pass between the fibers instead of beating across them, so it reaches down to the backing without chewing the pile - and because there is no motor and no moving part, it is quiet and there is nothing to burn out.
How to use it
Work it in both directions across the lane, not just with the nap. The first pass releases the soil; the second sets the pile. It is more physical than pushing a vacuum and it is slower, which is the honest tradeoff - this is a tool you use on the areas that need it rather than across a whole house. Edges and baseboard margins are where it earns its place fastest, since that is exactly where a wide floor head cannot get.
Fitment
The head is spec'd for a standard 1-1/4 inch wand, which is the most common size on portable canisters, upright wands and central vacuum systems. Cross-referenced by some suppliers as Fitall 99.1 047-865, with the D300 designation. Head width varies between listings in this category, so if a specific width is critical to your application, ask us and we will measure the item in stock.
Specifications
- Type: passive rug rake and carpet grooming attachment
- Part number: FA-5524
- Cross-reference: Fitall 99.1 047-865, D300 rake head
- Wand fitting: 1-1/4 inch standard
- Color: light gray
- Powered: no, passive teeth with suction through the head
Frequently asked questions
Will this fit my vacuum?
It fits a standard 1-1/4 inch wand, which is the most common size on portable canisters, upright wands and central vacuum systems. Check your wand end diameter if you are unsure.
Does it replace my regular floor tool?
No. It supplements it. You still vacuum with your standard floor tool, then use the rake on the matted or high-pile areas that need grooming.
Is it safe on shag carpet?
Yes. It is purpose-built for shag and frieze. Unlike a rotating brushroll, the teeth pass between long fibers rather than beating across them, so they will not tangle or chew the pile.
Is it powered?
No. It is a passive tool. The teeth do the raking and the vacuum's suction removes what the raking releases.
How wide is the head?
Head width varies between listings in this category. If a specific width matters for your application, contact us and we will measure the item currently in stock.
Can I use it on artificial turf?
Rakes in general are used on turf, but turf compatibility has not been verified for this specific part. Contact us before ordering for that use.
Discount Cleaning Products is an authorized dealer for the vacuum and floor care brands we carry, with US-based support from people who work on this equipment every day. If you are not certain this part matches your machine, send us your model number and serial plate details and we will confirm the fit before you order.
