Most commercial buildings are not all carpet or all hard floor - they are carpeted offices opening onto tiled corridors, with a lobby, a break room and a stairwell landing in between. The ProTeam 106263 tool kit is built for exactly that mix. It combines an 18-inch Sidewinder carpet tool, an 18-inch Sidewinder hard surface tool with a brush strip, and a two-piece friction-fit aluminum wand, so one operator switches surfaces in seconds without walking back to the closet.
Both heads are Sidewinders, which means they are swept side to side in a wide arc rather than pushed and pulled. Contract cleaners adopted the design because it does two things at once: it covers more floor per stroke, and it keeps the operator standing upright instead of bending, which matters a great deal when a loaded backpack vacuum is riding on the hips.
Built for
Use cases
- Mixed-surface nightly routes. Carpeted suites and tiled corridors on the same run, with no tool swap trip in between.
- Open floor plans and cubicle farms. The wide arc shortens the route across large low-pile carpet areas.
- Under desks, credenzas and conference tables. The flexible neck lets the head travel under furniture while the operator stands.
- Edges and baseboards on hard floors. The brush strip on the hard surface head lifts grit out of the wall joint.
- Elevated and vertical surfaces. With the wand extended, the same head reaches ledges, vents and upper wall areas that would otherwise need a ladder.
What is in the kit
- 18-inch Sidewinder carpet tool for low-pile commercial carpet
- 18-inch Sidewinder hard surface tool with brush strip for tile, VCT and sealed concrete
- Two-piece friction-fit aluminum wand for adjustable reach and compact storage
Compatibility
This kit uses the standard 1-1/2 inch tool coupling found on ProTeam commercial backpack and canister vacuums. Check the diameter of your existing wand before ordering; a 1-1/4 inch machine needs a different kit.
Frequently asked questions
How much faster is a Sidewinder than the floor tool that came with my backpack?
The gain comes from a wider head swept in an arc instead of a narrower head pushed and pulled. Published productivity figures for Sidewinder-style tools cite a substantial increase over traditional push-pull wands, though how much you actually gain depends on how open your floor plan is. The most consistent benefit reported by crews is less bending, not just more square feet.
Can I leave the carpet head on and use it on tile?
You can, but you will not get the same result. The carpet head uses a smooth lip tuned for pile, while the hard surface head carries a brush strip that agitates and captures fine dust on smooth floors. Swapping heads takes only a few seconds, which is the point of buying the combination kit.
Will this work on high-pile or plush carpet?
Sidewinder carpet tools are designed for low-pile commercial carpet, which is what most offices, schools and healthcare corridors use. On thick plush residential carpet a powered brush roll will lift soil better than any air-only tool.
Do I need the two-piece wand, or can I use my existing one?
The kit includes its own two-piece aluminum wand. If you already have a wand you like, the tools will fit it as long as it uses the same 1-1/2 inch coupling.
Is this a genuine ProTeam kit?
Yes. Discount Cleaning Products is an authorized ProTeam dealer and this is ProTeam part number 106263, not an aftermarket equivalent.
About Discount Cleaning Products
Discount Cleaning Products is an authorized ProTeam dealer with US-based support. We can confirm coupling diameter and machine fit before you order, and we stock the individual Sidewinder heads separately when you only need to replace one.
