The MegaVac is ProTeam's heavy-duty backpack, and the 107160 is the kit that makes it a two-job machine. Alongside a full 1-1/2 in. vacuum tool set built on the 14 in. Xover Performance floor tool, this kit includes the MegaVac blower tool, so the same unit that vacuums the building can be switched over to move debris rather than collect it.
That matters most where sweeping is slow and vacuuming is impractical. Loading docks, stairwells, parking decks, mechanical rooms, gymnasium bleachers and equipment bays all collect debris in volumes and in places where a broom is a losing proposition. Blowing the debris into a line and then picking it up in one pass is faster than chasing it, and it uses a machine the crew already carries rather than a second engine-driven blower that has to be fuelled, stored and maintained.
For vacuum duty, the 14 in. Xover Performance floor tool is the aggressive option in ProTeam's Xover range. Its stiffer brush works agitation into carpet fibre and lifts deep-seated soil that a soft multi-surface head passes over. That is the head you want on entry zones, corridors and any medium-pile commercial carpet that takes grit off the street.
The 56 in. two-piece, two-bend aluminum wand assembles to a single fixed length with a positive button lock. On a shared machine this is often preferable to a telescoping wand: no setting to slip mid-shift, no adjustment mechanism to pack with grit, and enough stiffness in aluminum to steer a 14 in. head without flex. The 17 in. crevice tool and 3 in. dust brush with reducer cover the detail work, from wall edges and elevator tracks to ledges, sills and equipment housings.
Built for
- ProTeam MegaVac users who want vacuum and blower capability from one machine
- Crews responsible for both carpeted interiors and hard exterior or utility areas
- Facilities with stairwells, docks, decks and mechanical spaces that are slow to sweep
- Anyone replacing a worn or incomplete 1-1/2 in. MegaVac tool set with a matched OEM kit
Use cases
- Blowing leaves, dust and debris out of stairwells, loading docks, parking decks and entryways
- Clearing grass clippings and grit off walkways and thresholds before they get tracked inside
- Daily carpet passes with the Xover Performance tool in corridors and entry zones
- Above-floor detail work on ledges, vents, tracks and equipment with the crevice tool and dust brush
Specifications
- ProTeam OEM part number: 107160
- Connection size: 1-1/2 in.
- 14 in. Xover Performance floor tool
- 56 in. two-piece, two-bend aluminum wand with button lock
- 17 in. crevice tool
- 3 in. dust brush with reducer
- MegaVac blower tool
Frequently asked questions
Does the blower tool work on any ProTeam backpack?
The blower tool in this kit is the MegaVac blower tool and is intended for MegaVac machines with a blower port. Not every ProTeam backpack has one, so check your machine before ordering.
Is the Xover Performance tool right for hard floors?
It will work on hard surfaces, but its stiffer brush is tuned for carpet agitation. If most of your route is finished hard floor, a felt hard surface tool or an Xover Multi-Surface head is the better match.
What size connection does this kit use?
1-1/2 inch. ProTeam also builds a 1-1/4 inch accessory family, and the two do not interchange, so confirm your machine's tool size.
Why a two-piece wand instead of telescoping?
A two-piece wand locks to one length and stays there. There is no adjustment to slip during a shift and no telescoping mechanism to jam with grit, which is why many supervisors prefer it on shared route machines.
Discount Cleaning Products is an authorized ProTeam dealer. We stock genuine OEM ProTeam machines, parts and accessories, and our US-based team can help you confirm fitment against your machine's model and serial number before you order.
