The Sonozaire 630A Ozone Generator is an industrial odor neutralizer built for restoration contractors, facility managers and remediation crews who need to permanently eliminate stubborn organic odors rather than cover them up. It produces ozone electronically from the oxygen already in the air, so there are no chemicals to buy, mix or store, and the unit runs unattended through a full treatment cycle.
Built for tough odor jobs
Sonozaire odor neutralizers are trusted across the restoration and facility-maintenance industries to break down the source of smoke, mold, mildew, pet, water-damage and garbage odors. Because ozone oxidizes the organic molecules that cause smells, the result is clean, neutral air instead of a perfumed cover scent.
Use cases
- Water and fire damage restoration: deodorize structures, contents and restoration chambers after a loss.
- Waste and sanitation: control odor in garbage rooms, compactor areas and transfer stations.
- Auto, RV and marine detailing: remove smoke and musty odors from enclosed cabins and interiors.
- Facilities and public venues: treat offices, dry cleaners, food-storage areas and other spaces between occupancy.
The 630A lets you adjust ozone output to match the severity of the odor and the desired treatment time, so a light deodorizing pass and a heavy post-loss treatment are both within reach of one machine.
Specifications
- Manufacturer part number: 630A (DCP item #AS36)
- Power: 115 volt, 50/60 Hz, single-phase AC only
- Ozone output: approximately 6,800 to 8,500 mg/hr, adjustable
- Rated treatment volume: up to about 15,000 cubic feet
- Construction: heavy-duty aluminum housing for durability and easy transport
- Maintenance: no chemicals required; occasional cleaning only
Please note: this is a special-order item and is non-returnable and non-refundable. A product manual and specification sheet are available on request. Ozone generators are intended for use in unoccupied areas only; follow all OSHA and EPA guidance for safe operation.
Frequently asked questions
How does the Sonozaire 630A remove odors?
It generates ozone electronically from oxygen in the surrounding air, then ozone oxidizes and destroys the organic compounds that cause odor instead of masking them with fragrance. No chemicals are used and the unit can run unattended.
What kinds of odors and applications is it used for?
Smoke, mold and mildew, pet, water-damage and garbage odors. Common settings include restoration job sites, waste and compactor rooms, auto detailing, dry cleaners, food storage areas and public venues.
Can people be in the room while it runs?
No. Industrial ozone generators are designed for unoccupied spaces, or for use at levels limited by OSHA and EPA regulations. The treated area should be vacated during operation and ventilated afterward.
How large an area can the 630A treat?
The 630A is rated for treatment volumes up to roughly 15,000 cubic feet, with an adjustable ozone output of about 6,800 to 8,500 mg per hour so you can match output to the severity of the odor and the length of treatment.
Is this unit returnable?
No. The Sonozaire 630A is a special-order item and is non-returnable and non-refundable. Please confirm the model and voltage before ordering.
Discount Cleaning Products is an authorized Sonozaire dealer with US-based customer service to help you confirm the right model for your odor-control program.
