This is genuine Sandia 1-1/2 inch black vacuum hose in a 12-foot length, supplied as bare hose. It is the same hose stock Sandia specifies on its Raven backpack vacuums and hip vacs, sold in a length long enough to cut a replacement run and still have material left for the next repair.
Vacuum hose is a wear item on any backpack or extractor, and it fails in ways that are easy to miss. A hose that has been stepped on, run over by a cart, or dragged around door frames for a season develops flat spots and pinhole splits. The machine still runs and the operator still hears suction at the motor, but airflow at the tool has dropped, and the crew ends up making two passes where one used to do. Sandia is direct about this: do not use the vacuum if any hose is damaged, cut, or punctured.
Built for
- Fleet and service shops cutting their own replacement hose lengths to order.
- Contractors running Sandia Raven backpacks and hip vacuums who want spare hose on the shelf.
- Custom setups where a stock hose length does not match how the machine is actually used.
- Anyone re-cuffing an existing hose after the ends have split.
Specifications
Sandia part number 10-0024-12. Black vacuum hose, 1-1/2 inch diameter, 12-foot length. Bare hose; cuffs are not included and are ordered separately. Genuine Sandia part, manufactured in the USA.
Warranty
Sandia is committed to deliver the best quality, and Sandia products are covered by a comprehensive warranty:
- 2-year warranty on all vacuum motors
- 2-year warranty on 100 psi pumps only; 1-year warranty on all other pumps
- 90 days on parts, tools, and accessories
Warranty terms shown are the terms of record for this listing. Coverage applies to defects in material and workmanship under normal use and service, and does not cover wear items, misuse, or repairs made by an unauthorized service provider.
Frequently asked questions
How do I know when a vacuum hose needs replacing?
Run the machine and pinch the hose closed at the tool end. If suction does not build sharply, air is getting in somewhere along the length. Then flex the hose section by section and look for flat spots, splits at the cuffs, and pinholes. Any cut or puncture means the hose should be taken out of service.
Does hose length affect suction?
Yes. Every additional foot of hose adds resistance, so a long hose trades some airflow at the tool for reach. Use the shortest length that covers the work: a short hose for a backpack worn on the operator, a long one only where the machine has to stay put while the operator moves.
Why buy genuine Sandia hose instead of generic hose?
Cuff fit. Generic hose in a nominal 1-1/2 inch size often will not seat tightly on Sandia cuffs and tools, and a loose joint leaks air at exactly the point where you need airflow. Genuine hose is cut and sized to the same specification as the original.
Are cuffs included with this hose?
No. This listing is bare hose. Sandia cuffs such as the 10-0195 swivel cuff and the 10-0155 straight threaded cuff are ordered separately, or you can order a pre-cuffed hose assembly instead if you would rather not build one.
Can I cut this hose to length?
Yes, that is the point of buying it in a longer run. Cut it square so the cuff seats evenly, and keep the offcut for the next repair.
Discount Cleaning Products is an authorized dealer for the brands we carry, and we stock genuine manufacturer parts rather than generic substitutes. Our US-based team can help you confirm the right part number for your machine model and serial number before you order, so the part you receive is the part that fits. If you are not certain which version your equipment uses, contact us with your model number and we will check it against the manufacturer parts list for you.
