Wet pickup is judged by what is left behind, and what is left behind is decided almost entirely by the rubber. A squeegee blade with a nicked, rounded or set edge stops sealing against the floor, and every pass leaves a film that has to be gone over again - or worse, gets signed off wet. New blades are the single cheapest way to make a wet tool behave like a new one.
The Sandia 10-0170-A is the OEM four-pack of black replacement blades for the 10-0170 14-inch squeegee floor tool. Sandia lists that tool across its backpack accessory line and on the Sniper flood pumper, so these blades cover both routine hard-floor wet work and restoration jobs. Buying in a four-pack is deliberate: crews that keep a spare set on the truck change blades when they should, not when the tool has already been dragging for a week.
Built for
- Wet pickup on tile, sealed concrete and VCT after auto-scrubbing or mopping
- Water damage and flood response, where recovery speed depends on a clean seal
- Restroom and kitchen floors, where standing water is a slip liability
- Routine blade rotation across a fleet of wet tools so no machine drifts out of spec
Why crews order this part
- A fresh edge seals to the floor, so one pass recovers what a worn blade needs three passes to chase
- Four blades in a pack means the spare is on the truck when the edge finally goes
- OEM sizing drops straight into the 10-0170 tool with no trimming or improvised shims
Specifications
- Sandia part 10-0170-A: replacement blades for the 14 in. squeegee tool, 4-pack
- Fits the Sandia 10-0170 14 in. squeegee floor tool
- Black blade material; Sandia also lists 10-0489 as a white 4-pack for the same 14 in. tool
- Listed by Sandia for the Raven 6-quart and 10-quart backpack accessory line and for Sniper flood pumper hard-surface work
Sandia Warranty Policy
Sandia is committed to deliver the best quality, and our products are covered by a comprehensive warranty.
- 2-year warranty on all vacuum motors
- 2-year warranty on 100 psi pumps only. 1-year warranty on all other pumps
- 90-days on parts, tools, and accessories.
Frequently asked questions
How many blades come in the pack?
Four. Sandia supplies this part as a 4-pack for the 14-inch squeegee tool.
What is the difference between the black blades and the white ones?
Sandia lists 10-0170-A as the black replacement blade set and 10-0489 as the white set, both for the same 14-inch squeegee tool. Some facilities specify white blades to avoid any chance of marking a light-colored floor.
When should blades be replaced?
When the working edge is rounded, nicked or has taken a permanent set, or when the tool starts leaving a film that a second pass has to clean up.
Will these fit a 20-inch squeegee?
No. These are sized for the 14-inch tool. For a 20-inch squeegee, see Sandia 10-0172.
Discount Cleaning Products is an authorized Sandia dealer. We stock the Raven backpack line and its service parts together, so the part you order is the OEM part that matches the machine rather than a generic substitute, and our US-based team can help you confirm the right number off your parts list before you order.
