When your Sandia 200 psi carpet extractor starts spraying weak, spitting, or losing pressure at the wand, the solution pump is usually the first place to look. The Sandia 10-0869-RA 200 psi Pump Rebuild Kit A is the plunger-and-seal service kit that lets a carpet cleaning technician bring that pump back to full pressure instead of replacing the entire pump assembly. It is built for the 200 psi solution pump used in Sandia 6-gallon and 12-gallon box extractors, so a worn pump gets new wear parts and your machine goes back to putting cleaning solution deep into the carpet where it belongs.
This is a maintenance and repair part, not a machine. Over hundreds of hours of cleaning, the pump plunger and its seals take the brunt of the work, and normal wear shows up as reduced spray pressure, an uneven or pulsing spray pattern, or fluid weeping from the pump. Rebuild Kit A replaces those high-wear components so the pump can build and hold 200 psi again.
Built for
- Restoring lost spray pressure on Sandia 200 psi 6-gallon and 12-gallon carpet box extractors.
- Scheduled preventive maintenance on a hard-working solution pump before it fails on the job.
- Stopping internal or external pump leaks caused by worn or hardened seals.
- Keeping a rental or fleet extractor spraying consistently across every job.
- Getting a still-good machine back in service without buying a complete replacement pump.
Specifications
- Type: Pump rebuild kit (Kit A) containing plunger and seal wear components.
- Designed for: Sandia 200 psi solution pump.
- Machine compatibility: Sandia 6-gallon and 12-gallon 200 psi carpet box extractors.
- Function: Replaces the plunger and seals that wear during normal use to restore pressure and seal integrity.
- Application: Commercial and professional carpet cleaning, restoration, and facility maintenance.
- Manufacturer: Sandia Products.
Because pump internals and seal designs vary by model year, confirm your pump matches the Sandia 200 psi platform this kit serves before ordering. If you are unsure which rebuild kit fits your machine, our team can help you match it to your extractor.
Frequently asked questions
What does the 10-0869-RA rebuild kit include?
Rebuild Kit A is the plunger-and-seal service kit for the Sandia 200 psi pump. It supplies the high-wear plunger and seal components that let you refresh the pump rather than replace the whole unit.
Which machines does this kit fit?
It is made for the 200 psi solution pump used in Sandia 6-gallon and 12-gallon carpet box extractors. Confirm your pump is the Sandia 200 psi model before ordering.
How do I know my pump needs rebuilding?
Common signs are reduced or weak spray pressure at the wand, an uneven or pulsing spray pattern, and fluid leaking from the pump. Those symptoms usually point to worn plunger seals that a rebuild kit can address.
Is this a full pump or just service parts?
This is a rebuild kit of wear parts, not a complete pump. It is meant to service an existing 200 psi pump and extend its working life.
Do I need any other kit to service the pump?
Kit A covers the plunger and seals. Some rebuilds also call for additional valve or gasket parts depending on the pump condition, so inspect the pump during service and order any further parts you find worn.
Discount Cleaning Products is an authorized Sandia dealer offering genuine replacement parts with US-based service and support. If you need help identifying the right rebuild kit for your extractor or have a question about servicing your 200 psi pump, our team is here to help you keep your equipment running.