The Sandia 80-0025 is the number 3 jet for a two-jet carpet extractor wand, carrying the 11003 spray tip designation. On a two-jet wand the tips do the actual work of laying solution into the carpet ahead of the vacuum slot, and they are wear items: a worn, partially blocked or mismatched tip shows up as streaking, uneven wetting, or a wand that suddenly rinses poorly. Carpet cleaning technicians generally replace tips as a set so the wand sprays evenly across its width.
Specifications
- Sandia part number: 80-0025
- Position: number 3 jet, two-jet extractor wand
- Tip designation: 11003
- Spray pattern: 110-degree flat fan, per the standard reading of the 11003 designation
The 11003 designation is a cross-industry spray tip code rather than a Sandia-specific one, and the same code is used on carpet wands by several manufacturers. Published flow figures for 11003 tips are rated at 40 PSI, far below the 300 to 500 PSI a carpet extractor runs, so we do not quote a flow rate here. That figure would not describe what you actually see at the wand.
Fits
This is the number 3 jet position on a two-jet extractor wand. Sandia numbers its wand jets by position, and jet part numbers are not interchangeable between positions. Confirm the jet position and the tip designation marked on the part you are replacing before ordering.
Discount Cleaning Products is an authorized Sandia dealer stocking genuine Sandia wand and jet parts, with US-based support.
