The Sandia 80-0500 stainless steel dual jet wand kit pairs a 12-inch S-bend extraction wand with 25-foot vacuum and solution hoses, giving carpet cleaners the reach to work a full staircase, hallway, or vehicle interior without dragging the extractor along. It is the same kit that ships with most Sandia Sniper 6-gallon and 12-gallon carpet extractors, and a popular upgrade or replacement for other portables rated up to 1200 PSI.
Use cases
The 25-foot hose run is the difference-maker: park the machine at the bottom of the stairs and extract the whole flight, reach deep into hotel rooms and offices from the corridor, and detail car and van interiors with the extractor sitting outside. The dual-jet wand lays down solution evenly for consistent results on traffic lanes and spot work alike.
Built for commercial use
The 12-inch stainless steel S-bend wand resists corrosion and daily abuse. Two jets disperse cleaning solution into the carpet, and a trigger switch on the handle controls dispensing when and where you need it. Quick-connect fittings keep the solution line secure and leak-free, and the kit is made in the USA with a 90-day warranty.
Specifications
- Wand: 12-inch stainless steel, S-bend, dual jets, trigger-controlled
- Vacuum hose: 25 ft x 1.5 in
- Solution hose: 25 ft x 1/4 in with quick-connect fittings
- Pressure rating: works with extractors up to 1200 PSI
- Standard kit on Sandia Sniper 6 and 12-gallon extractors
- Made in USA - 90-day warranty
Field tips
On stairs, work top-down with the machine parked at the bottom so recovered water never travels over cleaned carpet, and use short trigger bursts on each tread - risers usually need only the vacuum pass. The S-bend in the wand is designed to keep the head flat on the carpet with your wrist in a neutral position; let the bend do the angling rather than rotating your forearm and the wand stays comfortable through a full truck-mount day. After each job, run clean water through the solution line for a minute to flush chemical residue from the jets and trigger valve - clogged jets are the most common cause of streaky extraction and the easiest to prevent.
Store hoses loosely coiled rather than kinked over a hook, and check the quick-connects for o-ring wear when you flush the line. If you run multiple extractors, a second 80-0500 kit means one wand can be drying or in cleaning rotation while the other works.
Frequently asked questions
Which extractors is this kit compatible with?
It comes standard with most Sandia Sniper 6-gallon and 12-gallon carpet extractors (100, 300, and 500 PSI models) and works with any extractor rated up to 1200 PSI that accepts a 1.5-inch vacuum hose and quick-connect solution line.
Can I clean a full flight of stairs without moving the machine?
Yes - that is the kit's signature use. The 25-foot vacuum and solution hoses let you park the extractor at the bottom and work an entire staircase, hallway, or vehicle interior without hauling the machine.
What are the hose sizes?
The vacuum hose is 25 feet by 1.5 inches and the solution hose is 25 feet by 1/4 inch with quick-connect fittings for a secure, leak-free hookup.
How does the wand apply solution?
The 12-inch stainless steel S-bend wand has two jets that spray solution evenly into the carpet, controlled by a trigger switch on the handle so you dispense only where you need it.
What warranty does it carry?
The kit carries a 90-day warranty and is made in the USA for commercial use.
Discount Cleaning Products is an authorized dealer with US-based customer service. Our team works with janitorial contractors, facility managers, and property-maintenance professionals every day and can help you confirm fit and compatibility before you order.
