The Sandia Sniper 80-2200-H is a 12-gallon hot-water carpet extractor that pairs a 200 PSI adjustable pump with dual 2-stage vacuum motors and a built-in 2000-watt heater. It delivers deep, hot-water extraction and fast drying for commercial carpet cleaning - and it ships complete with hose and wand, ready to put to work.
Built for the job
The Sniper is built for cleaners who need hot-water deep extraction and quick dry times.
- Commercial carpet cleaning in offices, hotels, and facilities
- Restoration and deep-soil extraction jobs
- High-traffic carpet that needs hot-water cleaning power
- Route carpet-cleaning businesses needing faster drying between stops
Specifications
- Tanks: 12-gallon solution and 12-gallon recovery
- Pump: 200 PSI adjustable solution pump
- Vacuum: Dual 2-stage vacuum motors with up to 205-inch water lift
- Heater: 2000-watt in-line heater raises solution up to 200 degrees F
- Power: Heater and motors use separate power cords on separate circuits
- Mobility / weight: 10-inch non-marking, non-skid wheels; about 114 lbs
- Included: Hose and wand included
Frequently asked questions
Why does it need two separate power cords?
The heater and the vacuum motors draw too much current to share one 15-amp circuit, so each plugs into its own circuit to avoid tripping breakers.
How hot does the solution get?
The 2000-watt in-line heater raises the cleaning solution up to 200 degrees F for a deeper, more effective hot-water clean.
Does it help carpets dry faster?
Yes. The dual 2-stage vacuum motors pull up to 205 inches of water lift, recovering more moisture so carpets dry faster.
Is it ready to use out of the box?
Yes. This configuration includes the hose and wand, so you have what you need to start extracting.
Discount Cleaning Products is an authorized Sandia dealer, and our US-based team can help you match the right extractor and wand to your work. The 80-2200-H is backed by full manufacturer warranty support.
