Home > Carpet Extractors > PSI > 100 PSI >

Sandia Sniper 6 Gallon Carpet Extractor 100 PSI Dual 2 Stage Motor with Heat 86-2100-H

Sandia Sniper 6 Gallon Carpet Extractor 100 PSI Dual 2
Sale Price: $1,430.32
Estimated Shipping Cost: Free Shipping Item

Availability: Direct Ship From Manufacturer
Product Code: 86-2100-H

Add Hose and Wand:

Add Upholstery Tool:

Description Frequently Asked Questions
Sandia Sniper 6 Gallon Carpet Extractor 100 PSI Dual 2 Stage Motor with Heat 86-2100-H

Powerful vacuum motors offer up to 205" water lift for efficient solution recovery that results in better extraction and faster carpet drying. High performance motors stay cool with an innovative air intake design that uses the vacuum's own cooling fans to pull cool, outside air over the motors, reducing motor temperature and preventing overheating. Heated units include a 2000 Watt in-line heater that lets you extract with 200 degree Fahrenheit solution. 6-gallon solution and recovery tanks allow for quick and easy fill and dump disposal, reducing downtime. Waist-high controls prevent bending and stooping to operate the machine. The controls are recessed in the machine and stay protected during use, in transit or in storage. 10" non-skid, non-marking wheels make stair climbing easy and do not scuff floors. Roto-molded polyethylene tanks withstand the toughest working environments and resist dents, chips and cracks.

NOTE: The manufacturer recommends plugging each cord into separate, 20amp circuits (usually found in bathrooms and kitchens) and, if possible, have nothing else plugged in on these circuits to free up all power for the extractor.
  • 97 CFM, Dual 2-Stage Vac Motor With 2000 Watt In-Line Heater
  • 6 Gallon Solution Tank and a 6 Gallon Recovery Tank
  • Large Stair Climbing Wheels
  • Top Mounted Control Panel
  • Two Powerful 2-Stage Vacuum Motors, 14.5 Amp

Sandia Warranty:

Sandia products have...
• 2-year warranty on all vacuum motors
• 2-year warranty on 100 psi pumps only. 1-year on all other psi pumps
• 90-days on components, parts, tools, and accessories.

Note: This warranty does not cover, and shall not be liable for, defects or failures resulting from
improper, or lack of maintenance, misapplication, misuse, tampering with or substitution of
provided parts. Additionally, this warranty does not cover pump stored in freezing conditions,
pump run for extended time with no water, use of powdered detergent, failure to clean system
regularly with vinegar solution. Filters removed from solution tank. Pumps with inline filters not
cleaned regularly.
Sandia covers up to one (1) year of service labor at the manufacturer’s calculated hourly labor rate/repair
time when performed by a manufacturer-authorized service provider. Ultimately, labor reimbursement costs
are at the discretion of the manufacturer. At no time is the manufacturer responsible for travel time to
complete on-call repairs. After one (1) year, the original retail purchaser is responsible for all labor costs
with no manufacturer reimbursement.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of any other
parts will void warranty. The manufacturer does not reimburse for parts used by client that were not
supplied directly for the machine under warranty.
The client must contact the manufacturer prior to working on or changing out of any parts, etc. Do not
send parts or equipment back to the manufacturer without an RMA Number and approval. No labor will be
paid for, nor parts cost paid for or reimbursed, that have not previously been approved by the manufacturer.
All warranty work must be approved and authorized to qualify, and appropriate warranty procedures must
be followed.
The warranty starts on the purchase date by the original purchaser from an authorized distributor, subject
to proof of purchase. If proof of purchase cannot be identified, the warranty start date is ninety (90) days
after the date of sale to the authorized distributor.

Other People Purchased
Sandia Stainless Steel 4" Wide Upholstery Tool, (Required for Machines with Heat), 10-0501 Sandia Solution Hose Assembly for Sandia Sniper 6 & 12 Gallon Carpet Extractors- 80-8007-A Sandia 12" Stainless Steel Single Bend Single Jet Sandia Carpet Wand, 80-8008 Sandia Vacuum Hose Assembly w/Cuffs 15' x 1-1/2" for Sandia Sniper 6 &12 Gallon Carpet Extractors- 50-1008-A
Sale Price: $128.56

Sale Price: $69.17

Sale Price: $223.00

Sale Price: $79.50

Stainless Steel Hand Tool 4 Wide Sandia Sniper Carpet Solution Hose Assembly for Sandia Sniper 6 Gallon Carpe 12 Stainless Steel Single Bend 1 Jet Wand for Sandia S Sandia Vacuum Hose Assembly w/Cuffs 15' x 1-1/2" for Sandia Sniper 6 &12 Gallon Carpet Extractors- 50-1008-A
S-Shaped Stainless Steel Wand 12" Wide 2 Jets for Sandia Sniper 12 Gallon Carpet Extractor 10-0861A
Sale Price: $245.00

S-Shaped Stainless Steel Wand 8 Wide for Sandia Sniper

Share your knowledge of this product with other customers... Be the first to write a review or ask a question