Sandia Sniper 86-2100 6-Gallon Carpet Extractor 100 PSI, Dual 2-Stage
Built for owner-operator carpet cleaners, apartment turnover crews, school custodial teams, and small commercial-cleaning shops working corridors, classrooms, and common areas. The 6-gallon footprint is small enough for one person to wheel into an office, stairs included, but big enough for several rooms before refill.
Why it works
On TMF and the cleaning-business forums, the strongest recurring advice for buyers stepping up from a $400 box-store machine is this: get a true 100 PSI pump and dual 2-stage motors, not a single motor with 80 PSI. The 86-2100 is exactly that combination at the entry point of true commercial gear, which is why we see it bought by new contractors and by facility teams alike.
Built for
- 100 PSI demand pump for true commercial cleaning power
- Dual 2-stage 14.5 A vacuum motors - 163 in waterlift, 100 CFM
- 6-gal solution and 6-gal recovery tanks for longer cleaning runs
- Large stair-climbing wheels make second-floor jobs manageable
- Top-mounted, waist-height control panel - no bending to operate
- 1-year pump and 2-year vacuum motor warranty
Frequently asked questions
Is this machine heated?
No - the 86-2100 is the non-heated model. If you need on-board heat, look at the 86-2100-H or step up to the heated Sniper line.
What size wand and hose should I add?
Most operators run a 12-inch dual-jet wand with a 25-foot hose set for general carpet work. Sandia's 80-0500 hose-and-wand kit is a common upgrade.
Can one person carry it upstairs?
Empty - yes. The chassis is under 100 lb and the stair-climbing wheel design lets one operator pull it up steps. Always drain the recovery tank before climbing.
Will it strip down old detergent residue?
100 PSI plus the right traffic-lane pre-spray and a slow wand pass will pull years of residue out of commercial carpet. Add heat or a scrub pre-treatment for the worst rooms.
Discount Cleaning Products is an authorized dealer with fast same-week shipping and direct-to-customer service. If you need help spec-matching this part to your machine, call us before you buy.
