The Sandia Sniper 86-2200 is a 6-gallon walk-behind carpet extractor built for owner-operator carpet cleaners, multi-unit residential turnover crews, and small commercial cleaning businesses that need real extraction performance without stepping up to a truckmount system. With a 200 PSI pump and dual 2-stage vacuum motors, the 86-2200 lifts deep soil and recovers more water in fewer passes - the difference between a carpet that dries in a few hours versus a job that stays damp overnight.
Who buys the Sniper 86-2200
This is the "step-up from rental, step below truckmount" carpet extractor. Owner-operator carpet cleaners use it as their primary daily-driver. Apartment turnover crews use it as the workhorse machine on multi-unit properties. Hotel housekeeping departments stage them on each floor for between-cycle deep cleans. Small cleaning companies use it to extend service offerings into carpet without the capital expense of a truckmount install. The 200 PSI pump and dual 2-stage vacs put it solidly in the commercial extractor category.
Top use cases
- Owner-operator carpet cleaning - portable, plugs in, and competitive on extraction performance with much pricier units.
- Apartment and multi-family turnover - cleans full units quickly enough that maintenance crews can complete a turn between leases.
- Hotel and motel deep clean cycles - between-cycle deep cleans of guest-room carpet and corridor traffic lanes.
- Restoration follow-up extraction - water removal step after restoration crews handle bulk water removal.
- Auto detailing and upholstery (with wand swap) - pairs with upholstery and detail tools for car-interior and furniture work.
Specifications
- Solution tank: 6 gallons
- Recovery tank: 6 gallons
- Pump pressure: 200 PSI
- Vacuum motors: dual 2-stage for higher CFM and lift than single-motor units
- Body: heavy-duty rotomolded polyethylene tank with reinforced frame
- Hose connection: dual high-pressure and vacuum hose ports for wand and tool work
- Power cord: long commercial-grade cord
Frequently asked questions
Why dual 2-stage motors instead of a single bigger motor?
Dual 2-stage motors deliver higher combined airflow (CFM) and water lift than a single motor of similar wattage, with the additional benefit that one motor failing does not park the entire machine. For carpet extraction work where water recovery rate determines dry time, dual motors are the difference between damp-overnight carpet and walk-on-by-evening carpet.
Is 200 PSI enough for residential and light commercial carpet?
Yes - 200 PSI is the working spec for the bulk of residential and light commercial carpet cleaning. It penetrates well, lifts soil, and is gentle enough on residential face fibers. Higher PSI (500+) is used by truckmount and high-end portable units for heavy commercial spec carpet and oil-based soils where the higher pressure is required.
Can I use it for tile and grout cleaning?
The 86-2200 is built for carpet extraction. With a tile-and-grout tool plus the right brush and detergent system, it can handle light tile work, but heavy grout cleaning is better suited to a dedicated tile cleaning machine with higher pressure and a head designed for hard surface.
What detergent and chemistry should I use?
Use a low-foam, hot-water-extraction detergent rated for portable extractor use. Avoid high-foam consumer carpet shampoos, which trip vacuum recovery shutoff and gum up the float. The Sandia OEM detergent line is the easy starting point.
How is it for dry time?
Dual 2-stage vacs significantly reduce dry time vs. single-motor units - typical dry time for medium-pile residential carpet is 3-6 hours depending on humidity and airflow. Use air movers or fans on completed rooms to drop dry time further.
Discount Cleaning Products is an authorized Sandia distributor with US-based customer service. We stock and ship the 86-2200 Sniper direct from Sandia distribution with full factory warranty and access to OEM accessories and parts.
