Sandia Sniper 86-R3-100-H 6 Gallon Heated Carpet Extractor with 100 PSI Pump and Single 3-Stage Vac Motor

Sandia Sniper 86-R3-100-H 6 gallon heated carpet extractor with 100 PSI pump
 
Alternative Views:


📊 AI-POWERED MARKET ANALYSIS
Highlight: 100 PSI Single 3-Stage Heated
Best For: Balanced mid-range cleaning
Expert Note: A single-cord heated option that doesn't compromise on water lift.
Sale Price: $1,699.00
Estimated Shipping Cost: Free Shipping Item


Free Shipping
Product Code: 86-R3-100-H


Add Hose and Wand:


Add Upholstery Tool:


Quantity:
Description Reviews FAQ
 

The Sandia Sniper 86-R3-100-H is a 6-gallon heated portable carpet extractor built for cleaning contractors, restoration techs, and in-house facility teams who need hot-water cleaning on stairs, in offices, and in rooms a truck mount cannot reach. The 2000W in-line heater warms solution to around 200F, which speeds up soil release on traffic lanes and grease on commercial carpet.

Built for

  • Commercial office carpet: traffic lanes, cubicles, and stairwells where heat speeds soil release
  • Apartment turnover: portable enough for upper-floor units without elevator-friendly truck-mount hose runs
  • Hospitality and restaurant: hot-water extraction for guest rooms, function rooms, and dining carpet
  • Stair cleaning: compact footprint with stair-climbing wheels for full-floor accounts
  • Restoration: hot-water flushing for water-loss carpet cleanup and odor neutralization

Specifications

  • Solution tank: 6 gallons
  • Recovery tank: 6 gallons
  • Solution pressure: 100 PSI
  • Heater: 2000W in-line, heats solution to approximately 200F
  • Vacuum: single 3-stage motor, 205 inches water lift, 99 CFM
  • Cord: 25 ft
  • Body: rotational-molded polyethylene
  • Wheels: large rear wheels, 3-inch double ball-bearing front casters

Frequently asked questions

Do I need a truck mount or will this work for full-time cleaning?

A portable like the 86-R3-100-H handles small to mid-sized accounts and stair work that a truck mount cannot reach. Most full-time cleaners run a portable like this alongside a truck mount, not instead of one.

How fast does the heater come up to temp?

Roughly 5 to 10 minutes from a cold start, depending on inlet water temperature. The in-line heater also tops up temperature during cleaning, not just before.

How is this different from the 86-3100-H twin-motor model?

The R3-100-H uses a single 3-stage vacuum motor; the 86-3100-H uses dual motors for higher airflow and water lift. Single-motor units draw less power and run on a single 15A circuit.

Does it work on glue-down commercial carpet?

Yes. 100 PSI is a typical pressure for glue-down commercial carpet. The heated solution helps lift greasy and oily soils common in offices and food service.

Discount Cleaning Products is an authorized Sandia dealer with US-based customer service. Pair this extractor with a 1.5-inch vacuum hose, solution hose, glide wand, and a Sandia auto-fill / auto-dump upgrade to build a complete portable rig in one order.

Features
  • Cleans carpet, upholstery, and stairs with 100 PSI solution pressure
  • Heats solution up to 200F with the 2000W in-line heater for tougher soil
  • Pulls debris with a single 3-stage vacuum motor rated 205 inches water lift
  • Holds 6 gallons of solution and 6 gallons of recovery in roto-molded polyethylene tanks
  • Climbs stairs on large rear wheels and 3-inch double ball-bearing front casters
  • Top-mounted control panel keeps switches above the recovery tank for easy reach

Other People Purchased
Sandia Stainless Steel 4" Wide Upholstery Tool, (Required for Machines with Heat), 10-0501 Sandia 12" Stainless Steel Single Bend Single Jet Sandia Carpet Wand, 80-8008
Sale Price: $128.56

Add
Sale Price: $223.00

Add
Sandia 10-0501 4-inch stainless steel upholstery cleaning tool for heated spot and carpet extractors Sandia 80-8008 12-inch stainless steel single-jet carpet extractor drag wand Sniper



Sandia 80-0130 3/4" Brass Tee $24.57
ProTeam 107155 6 QT AviationVac Transportation Backpack Vacuum w/ Xover Performance Floor Tool Kit C $591.50