The Aztec Sidewinder 24-inch propane strip machine (model 01024-603) is a high-production floor machine built to strip old finish and deep-scrub hard floors far faster than a traditional swing buffer. Its unique gimbaled, planetary drive spins three counter-rotational brushes, combining brush speed with up to 288 pounds of head pressure to cut through built-up wax and finish in a single pass. For contractors and in-house crews that strip and recoat large floors, the Sidewinder turns an all-day job into a fraction of the time.
Built for high-production floor work
This is a machine for serious square footage, not small touch-ups. Crews use it to:
- Strip old finish from VCT, terrazzo, and close-fitted tile in preparation for a new top coat.
- Deep-scrub hard floors in schools, hospitals, retail stores, and warehouses.
- Restore large facility floors where a swing machine would be too slow.
- Work cord-free across wide-open areas thanks to propane power.
Because it is propane-powered, there are no cords to drag and no battery run-time limits, so the operator keeps moving across big floors without stopping to relocate or recharge.
Specifications
- Engine: propane-fueled 603cc Kawasaki with standard centrifugal clutch
- Drive: gimbaled planetary drive with three counter-rotational brushes
- Brush speed: up to approximately 1,150 RPM
- Head pressure: up to 288 lbs for aggressive stripping and scrubbing
- Cleaning path: 24 inches
- Productivity: strips up to about 15,000 sq ft per hour; scrubs up to about 30,000 sq ft per hour
- Safety and compliance: catalytic muffler, auto shut-off and kill switch; UL and CGA approved; meets CARB and EPA emissions standards
- Includes: propane tank, key start, transport wheel, strip brushes, catalytic muffler, centrifugal clutch
Frequently asked questions
What does the Aztec Sidewinder do?
It is a propane-powered floor machine built to strip old finish and deep-scrub hard floors fast. Its gimbaled planetary drive spins three counter-rotational brushes, stripping at speeds a standard swing buffer cannot match - ideal for prepping VCT, terrazzo, and close-fitted tile for a fresh top coat.
How fast can it strip a floor?
The Sidewinder strips up to about 15,000 square feet per hour and can deep-scrub up to about 30,000 square feet per hour, which is why it is used for large-area work where productivity matters.
What engine powers it?
A propane-fueled 603cc Kawasaki engine with a standard centrifugal clutch. Propane means no power cords to drag and no battery run-time limits, so the operator can cover large floors without stopping.
Is it safe to run indoors?
It includes a catalytic muffler and meets CARB and EPA emissions standards, and it is UL and CGA approved. This model also adds an auto shut-off and kill switch for added operator safety. As with any propane equipment, adequate ventilation is required.
What surfaces is it designed for?
Deep scrubbing and fast stripping of hard-surface floors - VCT, terrazzo, and close-fitted tile - in schools, hospitals, retail, warehouses, and other large commercial buildings.
Discount Cleaning Products is an authorized Aztec dealer with US-based support. If you are weighing the 24-inch Sidewinder against other path widths or comparing propane to battery strip machines, our team can help you choose the right machine, brushes, and pads for your floors and square footage.