The e-Cloth Deep Clean Mop is built around a simple premise: with the right fiber and plain tap water, you do not need a floor chemical. Its microfiber head is engineered so that the fibers lift and trap grease, grime and soil - along with the bacteria riding on it - rather than smearing a detergent film across the floor and leaving residue behind for the next pass to pick up.
That matters most to households with crawling babies, with pets that lick floors, or with anyone in the house who reacts to cleaning-product fumes. It matters commercially too, in daycares, veterinary practices and food-service back rooms where reducing the number of chemicals in the building is a goal in itself.
Built for
Use cases
- Homes with babies, toddlers or pets. No chemical residue left on the surface they crawl and lie on.
- Sealed hard floors of every type. Tile, vinyl, laminate, sealed hardwood and stone all clean with water alone.
- Chemical-sensitive households. No fumes, no scent, nothing to trigger a reaction.
- Cutting recurring cost and plastic. The head is washable and reusable, so there are no disposable pads and no cleaner bottles to keep buying.
How to use it
Wet the mop head thoroughly and wring it out - it should be damp, not dripping. Lay the head on the floor with the hook-and-loop side facing up, press the mop base onto the center of it, and twist the handle to set your working height. Mop in an S-shaped pattern rather than straight lines so you are always pulling soil forward instead of driving over ground you have already cleaned. When the pad loads up, pull it off, rinse it under hot water, wring it out and put it back on.
Specifications
- Lightweight aluminum handle, extends to approximately 5 feet
- Swivel head for maneuvering around furniture and into corners
- Machine-washable, reusable microfiber head
- Designed for use with water only - no chemical cleaner required
- e-cloth item number 10620
Care
After each use, detach the head, rinse it, wring it out and hang it to dry. Weekly, machine wash it hot with a small amount of detergent. Do not use fabric softener - it coats the fibers and is the single most common reason a microfiber head stops performing.
Frequently asked questions
Does it really clean with just water?
That is the design. The fibers are fine enough to lift and hold grease and soil mechanically, and e-cloth states the fiber structure removes over 99 percent of bacteria from hard surfaces using water alone. What water-only cleaning does not do is disinfect - if you need a disinfected surface for a specific reason, you still need a registered disinfectant.
What floors can I use it on?
Sealed hard floors generally: tile, vinyl, laminate, sealed hardwood and stone. As with any damp mop, avoid soaking unsealed wood or unsealed stone.
How long does the mop head last?
Microfiber heads are rated in wash cycles rather than months, and e-cloth backs its heads with a wash guarantee. Real-world life depends heavily on care - washing hot without fabric softener and letting the head air dry is what keeps the fibers working.
Why does my microfiber mop stop picking up dirt?
Almost always fabric softener or dryer sheets. Both leave a coating that fills the space between fibers and kills the capillary action the fiber depends on. Wash with a little detergent only, and the head usually recovers after a few clean washes.
Can I use a floor cleaner with it anyway?
You can, but it works against the point of the tool and it tends to leave the residue that water-only mopping avoids. Most users who add cleaner do so out of habit rather than need.
About Discount Cleaning Products
Discount Cleaning Products is an authorized e-cloth dealer. We stock the full Deep Clean Mop system including replacement heads, so you can keep the same handle in service for years. Our US-based staff is happy to help you choose between the mop systems.
