Airmaster Fan 71526 Industrial Non-Oscillating, 30", #UPI-30PA2A

The Airmaster 71526 is a 30-inch, three-speed industrial air circulator on an adjustable pedestal with a solid base, cataloged by Airmaster as model UPI-30PA2A. It is a non-oscillating fan built for warehouses, shops, loading docks and production floors where a fixed, high-volume air stream is wanted rather than a sweeping one. Airmaster is a US fan manufacturer and 71526 is Airmaster's own EDP number, not a distributor code.

Specifications

• Catalog model: UPI-30PA2A (3-SP), 30-inch adjustable floor unit, solid base
• Airflow: 7,185 CFM high / 5,300 CFM medium / 3,415 CFM low, rated per AMCA Standard 230-99
• Speeds: 3, at 1,080 / 700 / 540 RPM
• Motor: 1/3 HP, 115V, 60 Hz, single phase, 3.0 full-load amps, 270 watts
• Motor type: totally enclosed air over (TEAO), permanent split capacitor, ball bearing, Class B insulation, thermally protected
• Efficiency: 31.5 CFM per watt
• Propeller: 3 galvanized steel blades, 5/8-inch shaft
• Guard: steel with nickel chrome finish, meets OSHA standards
• Tilt: 30 degrees up and 15 degrees down from horizontal in the floor-mount position
• Cord: 15-foot three-conductor supply cord with NEMA 5-15P plug
• Sound: 76 dBA. Maximum ambient 104 degrees F
• Outside diameter: 33-1/2 inches. Maximum depth 16 inches
• Air velocity: 950 fpm at 10 ft, 690 at 20 ft, 390 at 40 ft, 310 at 60 ft, 160 at 80 ft
• Weight: 90 lb shipping
• Listings: UL listed. Five mounting options available
• Warranty: 3 years

Sources disagree on the adjustable pedestal height range shipped in this unit pack, so we do not publish a height figure. Discount Cleaning Products is a US-based Airmaster dealer and can quote replacement heads, pedestals, bases and wall brackets for any Airmaster circulator.