The Aztec 015-62 Guzzler 620 is the manual 30-inch floor solution retriever that floor stripping contractors, building service companies, and large facility custodial teams reach for when the work is full-floor stripping and the recovery has to keep up with the stripping pace. The Guzzler has no motor, no battery, no cord, and no breaker dependency - which on a long stripping job is precisely what an experienced stripper wants.
Built for
Floor stripping contractors running full-floor strip-and-recoat programs on commercial floors. On a 50,000 square foot warehouse strip, recovery time is the production bottleneck; the Guzzler's 30-inch squeegee path and 36-gallon tank match the production rate of two-operator stripping crews better than most powered wet vacs.
Building service companies on hospital, school, and office building stripping schedules. The unit is so quiet (operator footsteps and wheel noise only) that crews can run it during occupied hours when an auto-scrubber would be too disruptive.
Industrial facility maintenance teams recovering coolant, water, and process spills in manufacturing environments. The no-electrical design avoids the explosion-risk concerns that come with running an electric wet vac near solvents or fuels.
Why no motor
The Guzzler's design philosophy is that motors and batteries are the failure modes on commercial wet vacs. Brushless motors fail. Batteries lose capacity. Breakers trip. Cord clamps break. The Guzzler eliminates every one of these failure paths by powering the recovery off operator motion through a self-priming diaphragm pump. Crews running multi-day stripping projects consistently report that the Guzzler outlasts and outproduces every powered wet-vac alternative on the same schedule.
The no-foam advantage
Auto-scrubbers and powered wet vacs aerate recovered solution and create foam, which both reduces effective tank capacity (the tank fills with air bubbles instead of liquid) and interferes with strip-and-recoat chemistry by re-suspending stripper residue. The Guzzler's diaphragm pump moves liquid without creating foam, so recovered solution stays liquid and the floor finish chemistry behaves as the chemical manufacturer intended.
Capacity and throughput
The 30-inch squeegee path retrieves solution at up to 30,000 square feet per hour - twice the practical throughput of typical wet-vac recovery. The 36-gallon polyethylene tank holds enough recovered solution to cover roughly 30,000 square feet of stripping work between dumps. On a typical 50,000 square foot warehouse strip the Guzzler dumps once or twice and the operator keeps moving.
Construction
Solid steel frame, corrosion-proof polyethylene tank with 8-inch lid for easy interior cleanout, nylon ball bearings throughout the drive system, and replaceable squeegee blades. Dry weight 65 pounds - one operator can move the empty unit from room to room without help. Made in the USA for commercial floor-care duty cycles.
Specifications
Squeegee path: 30 inches. Tank capacity: 36 gallons (polyethylene). Throughput: up to 30,000 sq ft per hour recovery. Power: none required (manual). Pump: self-priming diaphragm. Frame: solid steel with nylon ball bearings. Dry weight: 65 pounds. Country of origin: USA.
Frequently asked questions
How does the Guzzler 620 work without a motor or battery?
The operator pushes the unit across wet floor and the 30-inch squeegee channels solution into the self-priming diaphragm pump, which transfers it into the 36-gallon polyethylene tank. There is no motor or battery - operator motion drives the entire recovery cycle.
Why is the no-foam feature important?
Auto-scrubbers and powered wet vacs whip recovered solution into foam, which fills the recovery tank with air bubbles instead of liquid and reduces effective tank capacity. Foam also interferes with strip-and-recoat chemistry. The Guzzler's diaphragm pump moves liquid without aeration.
How fast is it?
The 30-inch squeegee path covers ground at the same rate as a typical 20 to 24-inch auto-scrubber on the recovery pass, and the 36-gallon tank holds enough liquid to cover roughly 30,000 square feet of stripping work between dumps.
Where does the recovered solution go?
The 36-gallon tank is dumped through the bottom drain at the end of each section. Most operators run the Guzzler alongside a stripping pour and dump the recovered solution into a building drain or holding container.
What about the squeegee blades?
The squeegee blades are replaceable. We stock replacement blades for the 015-62 and the matching parts kit, so a worn squeegee is a quick swap rather than a buy-a-new-machine event.
Discount Cleaning Products is an authorized Aztec dealer. We stock the 015-62 Guzzler 620 along with replacement squeegee blades, pump kits, and the broader Aztec floor-stripping equipment line.