The Esteam E300 Pro is a compact, professional-grade portable carpet extractor built for technicians who need to chase spots, traffic lanes, stairs, and small jobs without rolling out a truck-mount or full-size machine. At just 18 pounds with built-in wheels and a pull-out handle, it moves between job sites and through tight spaces without slowing you down.
Use it for residential spotting calls, commercial maintenance routes, restaurant booth cleaning, restoration touch-ups, automotive interior detailing, and stairwell work where a heavier extractor cannot reach.
Built for these jobs
- Carpet cleaning service spot calls — small enough to take into a customer home for a single problem area without setting up the truck-mount line.
- Stairs and tight commercial corridors — the rotomolded body and 96-inch hose let one tech work an entire flight of stairs from one position.
- Restoration and water-loss spotting — pulls residual moisture from area rugs, upholstery, and isolated spots after primary extraction.
- Auto detailers — reaches deep into vehicle interiors, mats, and trunks where a 13-inch wand cannot.
- Janitorial maintenance — daily spotting on office carpet, restaurant booths, and hospitality lobbies.
Specifications
- Solution tank: 3 gallons
- Recovery tank: 3 gallons
- Pump: 55 PSI demand-type spray pump
- Vacuum motor: 2-stage, 100 CFM, 76-inch water lift
- Hose: 96-inch length with clear-view hand tool
- Power cord: 20 feet
- Amperage: 7.3 amps
- Dimensions: 19-inch L x 10-inch W x 16.5-inch H
- Weight: 18 pounds
- Housing: durable rotomolded body
- One-latch removable tank for fast emptying and refilling
Frequently asked questions
Will the E300 Pro replace a full-size carpet extractor?
No, and it is not designed to. The E300 Pro is a spotter, built to handle small areas, stairs, upholstery, and traffic-lane touch-ups. For wall-to-wall residential or large commercial cleaning, pair it with a larger machine or a truck-mount.
Is the 55 PSI pump strong enough for commercial work?
Yes for spotting and upholstery. 55 PSI is the proven sweet spot for spotters because higher pressure tends to drive water past the recovery point on small tools. If you need higher pressure for full carpet extraction, look at 100+ PSI machines like the Sandia Super Spot-Xtract 50-3100.
Does it have an inline heater?
No. The E300 Pro is a no-heat machine. Pre-heat your solution in the tank or use chemistry that activates at room temperature.
What chemicals are safe to use?
Any low-foam, prosumer-grade carpet or upholstery cleaning solution rated for portable extractors. Avoid solvent-based products that are not rated for portable plastic tanks.
Can one technician carry it up stairs?
Yes. At 18 pounds with the built-in handle, most technicians carry it one-handed and pull the hose for stair work without setting it down on every step.
Discount Cleaning Products is an authorized Esteam dealer with US-based customer service. Need help selecting accessories, replacement hand tools, or extraction chemistry to pair with the E300 Pro? Our team works with carpet cleaning professionals every day and can help you build the right kit for your service mix.
Use cases
The Esteam E300 is built for technicians who need a small, fast, and quiet machine they can carry into a customer's home or vehicle. Field crews most often use it for: rapid spot and stain removal on residential and commercial carpet; stair cleaning, where a 96-inch hose makes a full flight workable without dragging a truckmount upstairs; auto detailing on seats, carpets, and headliners; restaurant booth and dining-chair upholstery; restoration touch-ups where a full extraction wand is overkill; and emergency call-outs that arrive after a larger machine is already loaded on the truck. At 18 pounds the E300 is light enough for one technician to manage on stairs and into apartments, and the rotomolded body shrugs off the bumps of daily commercial use.
Frequently asked questions
What hose length is included with the E300?
The E300 ships with a 96-inch (8 foot) solution-and-vacuum hose plus a clear-view hand tool, which is the working length most spotters use. Longer hoses can be sourced separately if you need to reach further from the unit.
Does the E300 heat the solution?
No. The E300 is a cold-water spotter. Pre-warm your spotter solution in a kettle or bucket if the cleaning chemistry calls for elevated temperature; the pump and vacuum motor are designed to be filled with pre-heated water without modification.
How loud is it for in-home use?
The 2-stage vacuum motor on the E300 is engineered to run on a standard 120V outlet without tripping a breaker, and it is quieter than a typical truckmount blower. Technicians regularly run it inside occupied homes and offices during business hours.
Can the E300 be used on upholstery and stairs?
Yes. The included clear-view hand tool is built for upholstery, stairs, and small spot work. The 55 PSI solution pump is calibrated to apply enough pressure to lift soil without saturating the substrate, which is the right balance for fabric, foam, and stair carpet.