The Hydro-Tek Hot2Go RPV50E1 is a 50 GPM electric water and flood recovery vacuum built for contractors who generate more wastewater than a standard wet vac can keep up with. Pressure-washing crews, restoration teams, and facility maintenance pros use it to capture surface runoff and transfer it up to 100 feet away while the vacuum keeps running, so the job never stops to empty a tank. It pairs an industrial two-stage vacuum motor with a heavy-duty stainless steel transfer pump in a compact 56-pound cart-style frame.
Built for high-volume water capture
Where this machine earns its keep is any job that produces standing water faster than you can bail it. Common uses include:
- Reclaiming pressure-washing wastewater on flatwork, fleet washing, and surface cleaning so runoff stays out of storm drains.
- Flood and water-damage restoration, pulling standing water out of basements, parking structures, and commercial floors.
- Fire-restoration and post-extinguisher cleanup where large volumes of dirty water must be evacuated quickly.
- Facility and parking-deck maintenance crews that need to move water across long distances to a drain or holding tank.
An included lift-out basket strainer catches leaves, trash, and large debris before it reaches the pump, and the whole unit is built to be easy to empty and maintain.
Specifications
- Flow rate: 50 GPM, up to 3000 gallons per hour
- Power: 115V / 20 amp, or 5000-watt generator
- Motor/pump: industrial 2-stage vacuum motor with heavy-duty stainless steel transfer pump
- Transfer distance: discharges wastewater up to 100 feet away
- Throughput rating based on 25 ft of 2-inch vacuum hose and 50 ft of 2-inch discharge hose
- Size: 17-inch W x 28-inch H, approximately 56 pounds
- Machine only - hoses sold separately (one intake, one discharge)
Hoses, wheels, and accessories
Common add-ons for the RPV50E1: DHV50 (50 ft x 2-inch) and DHV25 (25 ft x 2-inch) vacuum/discharge hoses; AHS07 caster wheel kit and AHS06 dolly wheel kit with 13-inch pneumatic tires; VFBB3 dry-operation filter 3-pack (converts it to a high-powered shop/detail vacuum); ATP75 vacuum scupper; ASF10 vacuum accessory bundle; and the ANTV5 Twister Vac surface-cleaner/vacuum attachment. Manufacturer manual and maintenance guide.
Note: this unit cannot be shipped to Texas.
Frequently asked questions
Does the RPV50E1 transfer water while it vacuums?
Yes. The dual-function design lets it transfer wastewater up to 100 feet away while vacuuming continues, so the operator never has to stop and dump a collection tank. That continuous flow is the main reason crews choose it over a standard wet vac for high-volume jobs.
What power does the RPV50E1 require?
It runs on standard 115V power and draws about 20 amps, or it can be powered by a 5000-watt generator for off-grid work. Published throughput is based on 25 feet of 2-inch vacuum hose and 50 feet of 2-inch discharge hose.
Do the hoses come with the machine?
No. This is the machine only. You need two 2-inch hoses, one for the intake side and one for the discharge side. Hydro-Tek offers the DHV50 (50 ft) and DHV25 (25 ft) 2-inch vacuum/discharge hoses.
How much water can it move per hour?
Up to 3000 gallons per hour at its rated 50 GPM, which is why it is sized for large pressure-washing reclaim jobs and flood recovery rather than small spot cleanups.
Can it ship to every state?
This unit cannot be shipped to Texas. Customers outside Texas can order normally; if you are in Texas, contact us before ordering.
Discount Cleaning Products is an authorized Hydro-Tek / Hot2Go dealer with US-based customer service that can help you match the right hoses, wheel kit, and accessories to your application. Order the RPV50E1 with confidence that you are getting genuine factory equipment and knowledgeable support after the sale.
