The EDCO 26010 is a set of three 24-pin traffic line removal cutters (TR3-24) for the EDCO TLR-7 traffic line remover. These cutters are the consumable wear part that does the work, so keeping fresh sets on the truck keeps a striping or pavement-maintenance crew cutting instead of waiting on parts.
Cutters are the heart of a traffic line remover, and how aggressively the TLR-7 erases a line depends entirely on the cutter configuration and condition. The 24-pin set is the coarser, more aggressive option - it bites hard into thick thermoplastic and tolerates the rough, irregular surface of chip-and-seal asphalt better than a finer 48-pin set. Like any cutting tool, these pins dull with use, and worn cutters slow production and load the machine. Crews that stripe and remove markings for a living keep spare 24-pin sets on the truck so a dull group can be swapped out through the TLR-7's tilt-top chassis in minutes rather than losing a day waiting on parts.
Use cases
This 24-pin set is the right choice when crews need aggressive, fast removal on demanding surfaces:
- Aggressive removal of thermoplastic pavement-marking lines
- Working on uneven, rough chip-and-seal asphalt where a coarser cut is needed
- Refreshing worn cutters on a TLR-7 to keep removal rates up
- Parking-lot, roadway and municipal line-removal projects
Specifications
- Set of 3 cutters in the 24-pin (TR3-24) configuration
- Designed specifically for the EDCO TLR-7 traffic line remover
- 24-pin layout provides aggressive removal of thermoplastic lines
- Suited to uneven, rough and chip-and-seal asphalt surfaces
- Consumable wear part; the TLR-7 tilt-top chassis allows safe cutter access for changes
Frequently asked questions
Which machine does the EDCO 26010 fit?
This set of three 24-pin cutters is designed for the EDCO TLR-7 traffic line remover.
When should I choose 24-pin cutters?
The 24-pin configuration delivers aggressive removal of thermoplastic lines and works well on uneven, rough or chip-and-seal asphalt.
How many cutters come in the EDCO 26010?
It is a set of three cutters, so you can replace a worn group and keep the machine running.
Are these a wear item?
Yes. Cutters are a consumable wear part. Keeping spare sets on hand prevents downtime when the existing cutters dull.
Discount Cleaning Products is an authorized EDCO dealer backed by US-based product support. Our team can help you match the right tooling, accessories, and replacement parts to your jobsite so you get full value from your investment.
