Does this kit include the bearing?

No. The 86326LB is intentionally Less Bearing (item 1 from the TG-10 parts list is not included). If your existing bearing is worn, order it separately so the rebuild is complete.

Will this fit any Edco grinder?

It is the head assembly for the TG-10 Turbo Grinder specifically. Other Edco grinder platforms have different head architectures and use different OEM kits. Confirm your machine model before ordering.

Why use red Loctite on the 3/8-24 cap screws?

The TG-10 head sees significant rotational vibration. Red Loctite (high-strength threadlocker) on cap screw 10030 keeps the fastener from backing out under load. Edco specifies it; substituting blue or no threadlocker is the most common cause of recurring loosening.

Can I rebuild with hardware-store fasteners?

The hex lock nut, cap screw, washer set in this kit is sized and graded to Edco's flex-head specification. Hardware-store fasteners may physically thread but rarely match grade or torque-to-yield, and they are the most common cause of premature flex-head failure on the TG-10.

Is the Morflex coupling the same as a standard rubber coupling?

No. The 86017 Morflex 402 is a balanced flexible coupling matched to the TG-10's drive geometry. A generic rubber coupling will fit the bolt pattern but will not handle the load profile correctly.

Edco 86326LB Turbo Grinder TG-10 Morflex Coupler Assembly (less barings)

Edco 86326LB TG-10 Turbo Grinder flex head assembly less bearing with Morflex 402 coupling and hardware

📊 AI MARKET SNAPSHOT

• Best For: Concrete polishing contractors and rental yards keeping an Edco TG-10 Turbo Grinder in service.

• Highlight: The 86326LB is the OEM head Assembly (less bearing, flex) for the TG-10 Turbo Grinder, bundling the rebuild hardware so a worn or vibrating head goes back to spec without sourcing each part.

• Expert Note: Swapping in the complete Assembly restores balanced grinding on the Edco Turbo Grinder and cuts downtime versus piecing together individual components from a parts diagram.

Sale Price: $569.32

Estimated Shipping Cost: Free Shipping Item

Product Code: 86326LB

Quantity:

Description

Reviews

FAQ

The Edco 86326LB is the genuine Head Assembly Less Bearing (Flex) for the Edco TG-10 Turbo Grinder. When the flex head on your TG-10 is worn, cracked, or vibrating, the 86326LB is the OEM rebuild bundle that brings the grinder back to spec without piecing together every individual hardware part from a parts diagram.

Built for

Concrete polishing contractors running the Edco TG-10 Turbo Grinder daily
Floor coating prep crews removing thinset, mastic, and old coatings
Rental yards keeping TG-10 fleet machines ready to dispatch
Restoration and concrete repair crews maintaining grinder uptime

What is in the kit

The 86326LB head assembly bundles items 2 through 10 from the Edco TG-10 parts list (the bearing itself, item 1, is not included). Inside the kit:

86308: Flange with shaft, flex head
86017: Coupling, Morflex 402 center
86309: Mounting disc, flexible head
86343: Bushing, rubber (1-1/4 by 3/4 by 3/8) - 4 quantity
10030: Cap screw 3/8-24 by 2 (use red Loctite) - 2 quantity
10336: Cap screw 3/8-24 by 2-1/4 - 2 quantity
10811: Lock washer 3/8 zinc - 2 quantity
10025: Flat washer 3/8 SAE zinc - 4 quantity
10004: Hex lock nut 3/8-24 zinc - 2 quantity

Why bundle the head assembly

Concrete contractors on grinder forums consistently note that piecing together flex-head rebuild parts one at a time costs more in downtime than ordering the assembly. The 86326LB ships everything you need (except the bearing itself) in one part number, with the right Morflex coupling and the matching cap-screw set already specified by Edco. Skipping the kit and substituting hardware-store fasteners is the common cause of premature flex-head failure.

Specifications

Application: Edco TG-10 Turbo Grinder, flex head rebuild
Configuration: Head Assembly Less Bearing (item 1 not included)
OEM part: yes - genuine Edco
Coupling: Morflex 402
Hardware: complete cap screw, washer, and lock nut set per Edco specification

Frequently asked questions

Features

Restores TG-10 flex-head performance with OEM Edco specification parts
Bundles the Morflex 402 coupling, flange, mounting disc, bushings, and hardware in one kit
Skips the parts-by-parts hunt by ordering items 2-10 from the TG-10 parts list together
Maintains warranty intent and grinder balance with factory hardware
Less Bearing configuration: order the bearing separately if your existing one is worn
Authorized Edco dealer with US-based parts support

	MK Diamond MK-215GL-XL 14" Supreme Grade Metal Bond Blade for Glass, Glass Blade # 170604 $191.99
	HydroTek,Replacement Pump for RPV50E1, 3/4HP, 115V 7.1 AMPS, PSG50 $350.60
	Agent Blue Soft Wash Heavy Duty, Water-Based, Biodegradable Degreasor, 1 Gallon $36.96
	DEWALT GAS PRESSURE WASHER 3800 PSI, DIRECT DRIVE # DXPW60604 $1,154.00
	MK Diamond MK-7501-30 14" Joint Widening Wet Cutting Blade for Cured Concrete, Concrete Blade # 169902 $464.99
	Sandia 80-0010 1/4" Brass Tee $12.31
	MK Diamond MK Yellow 2-1/4" (57mm) Standard Grade Core Bit for Concrete & Asphalt, Coring Drilling # 156325 $64.99
	Vinyl Security Cover for M8090 $278.57
	SIMPSON SuperPro Roll-Cage 4400 PSI at 4.0 GPM SIMPSON 420 with AAA Triplex Plunger Pump Cold Water Professional Gas Pressure Washer, Model # SW4440SCDM $1,499.99