Injectidry Water Separator

📊 AI-POWERED MARKET ANALYSIS

• Highlight: Commercial air mover by Injectidry — high-velocity airflow for carpet and structural drying

• Best For: Water damage restoration, carpet cleaning & construction drying

• Expert Note: Position at 45° for surface drying and flat for structural drying; daisy-chain up to 4 units on a 20A circuit.

Sale Price: $308.06

Estimated Shipping Cost: $14

Product Code: AC8307

Quantity:

Description

Reviews

FAQ

Injectidry Water Separator

The water separator works to protect your HP 60 blower by preventing bulk water from passing through it when drying in a negative mode. It should be used after the initial vacuuming with a truck mount system to capture the remaining water that could be undetected. Placing it as we recommend, it will collect bulk water that my be trapped in ceilings, walls, floors, or cabinets that you are drying. It is no ordinary bucket. The separator has an anti-collapse ring built into it.

	Hot2Go Hot Link 12V DC #CPHL5DC-Hot Water Heater for Cold Water Pressure Washers, Pressure Washer Not Included Hot-2-Go CPHL5DC $2,496.60
	Protimeter MMS2 - Basic Meter with Hard Case, Probes, Hammer Probes, Software and Cable #BLD8800-C-S $1,504.00
	EDCO TMS-10-1.5L 10" Electric Tile Saw, 24200, 1 1/2 HP, 24200 $2,766.63
	Sandia 90-1015 Fan for Air Mover $49.54
	Eureka Filter HF9 Victory/Whirlwind 4300-4400 $9.30
	Pressure-Pro Pressure Washer Hose 3/8" x 200' w/ Quick Connect, Non-Marking Gray, Commercial Grade, Max Pressure: 4200 PSI, Max Temp: 250 degF $333.35
	Be Pressure B4013HC Pressure Washer 4000 PSI 389CC Honda Gas Cold, B4013HC $1,150.88
	EDCO CC0837P3 Crack Chasing Saw Accessory 8" X .375 Diameter Blade Cured $281.57